Hedge Trimmer

How to start a hedge trimmer

Starting your Husqvarna hedge trimmer depends on the type of the product you have.

Battery and petrol models use different methods.

Safety first

Before starting:

  • Wear protective gloves and eye protection
  • Place the hedge trimmer on the ground
  • Ensure blades are not touching anything
  • Hold the machine firmly

Select your hedge trimmer type below for the correct starting method:

Battery hedge trimmer - Aspire

Steps:

  1. Insert the battery securely
  2. Press and hold the safety trigger
  3. Press the start/trigger button
  4. Begin cutting

The blades start immediately when both controls are engages.

Petrol hedge trimmer

Cold start (engine not running)

  1. Press the primer bulb
    - Press several times until fuel is visible
  2. Set the choke to “start”
    - This helps the engine start
  3. Pull the starter cord
    - Pull until the engine “fires”
  4. Move the choke to “run”
    - Turn off or reduce choke
  5. Pull again until the engine runs

Warm start (engine recently used)

  • Leave choke in run position
  • Pull starter cord until the engine starts

Warm engines do not require choke.

Common starting problems (quick fixes)

Battery hedge trimmer not starting

  • Check battery charge
  • Ensure battery is inserted correctly
  • Make sure that both triggers are engaged

Petrol hedge trimmer won’t start

  • Check fuel and switch position
  • Repeat starting steps

Starts then stops

  • Choke still on — move to run position
  • Not enough fuel — prime again

Tips for easier starting

  • Use fresh fuel for petrol models
  • Do not overuse the choke
  • Follow the correct sequence
  • Let the engine warm up briefly
Was this article helpful?