High Pressure Washer06/03/2024
How to change a hose on a high-pressure washer
Always check for damage before you operate your high-pressure washer.
Do not use the product if the parts are damaged or missing.
If the hose is worn or damaged, it can be replaced.
How to change a hose on a high-pressure washer
- Remove the hose stop from the high-pressure water hose.
- Push in the three snap locks and remove the hose reel cover.
- Remove the security pin and disconnect the high-pressure water hose from the swivel.
- Pull out the high-pressure water hose from the product.
- Install a new high-pressure water hose in the opposite sequence. Make sure to install the high-pressure water hose (A) and the hose guide (B) in the correct position.
- Pull out the hose to expose the security pin.
- Pull out the pin.
- Take off the hose.
- Replace the hose with a new one.
- Put the pin back to secure the hose.
Was this article helpful?