Husqvarna Fleet Services™11/02/2024
Adding a 500-series Automower®robotic lawn mower to Husqvarna Fleet Services™
To add a 500-series Automower® robotic lawn mower to Husqvarna Fleet Services™, you need to be within Bluetooth range of the mower and use the mobile app. Then follow the instructions below.
Note: An Automower® robotic lawnmower can only have one active Bluetooth connection at a time. Make sure that no one else who has an active connection to the mower is nearby before trying to add it to Husqvarna Fleet Services™.
- Open the Husqvarna Fleet Services™ app.
- Select the Inventory tab and tap the three dots in the upper right corner.
- Select Add robotic mower.
- Select Via Bluetooth.Open the Automower® Connect app by tapping Continue (or tap Go to App Store to download the app if you do not already have it).
- Turn on the main switch on your mower. Your Automower® robotic lawn mower is now discoverable for 180 seconds. Stay near the mower until the pairing is complete.
- Wait for the mower to show in the list. If the mower does not show in the list in approx. 30 seconds, restart your mower.
- Select the mower that you want to add.
- Enter your pin code.
- Tap Acquiring pairing code.
- Give the mower a name in Husqvarna Fleet Services™.
- Tap Done.
- Select Inventory and verify that the mower is now found in the list.
The mower has now been added to Husqvarna Fleet Services™
Already included in a fleet?
If you are trying to add a robotic lawn mower but receive a notification that it is already included in a fleet, you need to contact Husqvarna support. An Automower® robotic mower can only be added to one Husqvarna Fleet Services™ solution.
Was this article helpful?