Kettingzagen

HUSQVARNA 365 X-Torq

Chainsaw 365

Husqvarna 365 is a saw for typical professional use. It has been developed in close cooperation with professional users working in the most demanding conditions. The low weight and high power are combined with a rugged engine, making this saw exceptionally versatile and suited for a wide variety of applications.The X-TORQ engine gives you a much more environtment friendly saw with radically lower exhaust emission level and fuel consumption.

  • Cylinder displacement
    70.7 cm³
  • Power output
    3.6 kW
  • Recommended bar length, max
    70 cm
  • Weight (excl. cutting equipment)
    6.4 kg

KENMERKEN

Wilt u dit product nader bekijken? Ontdek meer over het product door de vormgeving en de functies te bekijken.

X-Torq

X-Torq®

Deliver lower fuel consumption and reduced exhaust emission levels in accordance with the world´s most stringent environmental regulations.
Air Injection

Air Injection®

Centrifugal air cleaning system for reduced wear and longer operating time between filter cleanings.

Quick-release air filter

Facilitates cleaning and replacement of the air filter.
565

Magnesium crankcase

Sturdily built crankcase withstands high rpms and tough professional use, ensuring a long service life.
Magnesium crankcase
X-Torq

X-Torq®

Deliver lower fuel consumption and reduced exhaust emission levels in accordance with the world´s most stringent environmental regulations.

Air Injection

Air Injection®

Centrifugal air cleaning system for reduced wear and longer operating time between filter cleanings.

565

Quick-release air filter

Facilitates cleaning and replacement of the air filter.

Magnesium crankcase

Magnesium crankcase

Sturdily built crankcase withstands high rpms and tough professional use, ensuring a long service life.

Specificaties

Hebt u meer informatie nodig om de juiste beslissing te nemen? Meer informatie vindt u in het onderstaande specificatiegedeelte. Vind een dealer bij u in de buurt

Motor

Cylinder displacement
70.7 cm³
Power output
3.6 kW
Maximum power speed
10200 rpm
Idling speed
2700 rpm
Spark plug
NGK BPMR7A, Champion RCJ7Y
Electrode gap
0.5 mm
Torque, max.
3.8 Nm
Fuel consumption
426 g/kWh
Fuel consumption
1.5 kg/h
Exhaust emissions (CO2 EU V)
747 g/kWh [1]

Inbegrepen bij aankoop

Recommended bar length, max
70 cm
Recommended bar length, min
40 cm

Afmetingen

Weight (excl. cutting equipment)
6.4 kg

Smeermiddelen

Oil tank volume
0.4 l
Oil pump type
Automatic
Oil pump capacity Max
20 ml/min
Oil pump capacity Min
4 ml/min

Geluidsniveau

Sound power level, guaranteed (LWA)
119 dB(A)
Sound power level, measured
118 dB(A)
Sound pressure level at operators ear
110 dB(A)

Trillingen

Equivalent vibration level (ahv, eq) front handle
5.7 m/s²
Equivalent vibration level (ahv, eq) rear handle
8.0 m/s²
[1] This CO2 measurement results from testing over a fixed test cycle under laboratory conditions a(n) (parent) engine representative of the engine type (engine family) and shall not imply or express any guarantee of the performance of a particular engine.
Husqvarna

ONDERDELEN EN ACCESSOIRES

Maak een keuze uit een reeks originele accessoires en onderdelen om uw product aan te vullen en te genieten van de extra ervaringen.

DEALER BIJ U IN DE BUURT

Heeft u hulp nodig bij het vinden van het juiste product? Of zoekt u service van echte vakmensen?  Onze officiële Husqvarnadealers hebben jarenlange ervaring en kunnen u uitgebreid adviseren, onze experts staan klaar om al uw vragen te beantwoorden. Hieronder vindt u meer informatie over onze services of een dealer bij u in de buurt.
Mogelijk dient u eerst akkoord te geven voor het feit dat de browser uw huidige locatie wilt gaan gebruiken
Filters resetten
U kunt dealers vinden door de zoekfunctie hierboven te gebruiken of in te zoomen op de kaart.