Automower®18/04/2024

How to remove the body of Automower® 320 NERA, 430X NERA and 450X NERA

Follow these steps to remove the top cover and the body of Automower® 320 NERA, 430X NERA and 450X NERA, for example, if you want to clean the robotic lawn mower fully.

  1. Push the STOP button to stop the product.
  2. Enter the PIN code, if necessary. Push the jog wheel for 3 seconds to set the product to OFF. You can also use the jog wheel to select Power off in the menu in the display.
  3. Make sure that the LED indicator on the jog wheel is not lit.
  4. Lift the top cover by the front and pull it forwards to remove it.
  5. At the rear of the product, place one hand at the handle of the chassis and one hand under the body.
  6. Pull firmly with both hands in opposite directions to remove the body.

Installation

  • Align the body with the chassis and push the body into position.
  • Align the top cover with the slits in the body of the product and push the top cover into position.
Was this article helpful?