Husqvarna 130C

The Husqvarna 130C features a high-performance 2-stroke engine that requires a 50:1 gasoline to oil ratio. For optimal performance and engine longevity, use unleaded gasoline (minimum 89 octane) mixed with high-quality Husqvarna 2-stroke engine oil. To protect the fuel system from gumming, it is highly recommended to use ethanol-free fuel or pre-mixed fuel like Husqvarna XP+ Pre-Mix. To find our convenient pre-mixed fuel, visit: https://www.husqvarna.com/us/fuel-oil-lubricants/2-stroke-fuel-and-oil/

The primary difference is the shaft design and ergonomic fit. The Husqvarna 130C features a curved shaft, making it shorter, lighter, and highly maneuverable for navigating tight spaces and trimming around obstacles like flowerbeds. The Husqvarna 130L features a straight shaft, providing an extended reach that is ideal for taller users or trimming underneath low-hanging bushes and fences. Both models share the same powerful 28cc engine.

Starting the 130C is easy thanks to its digital ignition and Smart Start® technology. Follow these steps: Push the air purge bulb 10 times. Put the choke control in the full choke position. Hold the product on the ground with your hand. Do not step on the product. Pull the starter rope three times with force. Push the choke control down to the half choke position in the center. Pull the starter rope handle until the engine starts. Let the engine runs for 10 seconds. Push the choke control full down to the no choke position.

The Husqvarna 130C utilizes a Tap 'n Go dual-line bump feed trimmer head paired with standard 0.095-inch diameter trimmer line. To advance the line while operation is running at full throttle, simply bump the trimmer head lightly on clean, hard ground or grass. This triggers the spool to automatically release more line to maintain a full 17-inch cutting swath.

The Husqvarna 130C comes equipped with a Tap n Go trimmer head. To reload, simply align the arrows on the head, feed the replacement line straight through the eyelets until you have even lengths on both sides, and twist the bump knob to wind the line inside the spool. To see a short video on this topic, visit: https://youtu.be/OcdoNK81wiU?si=VF8U1dD6z0Yc9x3z

No, the Husqvarna 130C is a dedicated, single-purpose curved shaft trimmer and does not feature a split-shaft design. If you require a multi-tool system that accepts interchangeable attachments (such as an edger, pole saw, or cultivator), consider a split-shaft model from the Husqvarna LK series, such as the 330LK.

The Husqvarna 130C weighs a lightweight 11.3 lbs (excluding cutting equipment). It is intentionally engineered for residential homeowners, balancing a powerful 1 hp engine with an ergonomic curved handle. Additionally, it integrates built-in LowVib® technology—using dampeners between the engine and the shaft—to drastically reduce vibration, minimize arm fatigue, and increase control during extended use.

Yes, for residential use, the Husqvarna 130C is backed by a standard 2-year consumer warranty. You can extend this warranty coverage up to 5 years by purchasing qualifying amounts of Husqvarna brand pre-mixed fuel or oil at the time of purchase and registering the product online.

If the trimmer won't start or stalls, check these three common solutions:
1. Fuel tank: Check the fuel tank to ensure the correct fuel is being used.

2. Spark plug: Check the spark plug to ensure it's dry and clean, that the electrode gap is correct and has a suppressor, and that it's sufficiently tightened.

3. Air filter: Check that the air filter is not clogged, and make sure that fuel is not too hot. Let tool cool for 20 minutes outside of direct sunlight and follow the cold start procedure to start again.

No, the Husqvarna 130C is strictly designed for flexible nylon trimmer line and is not compatible with metal saw blades or grass blades. It does not include the heavy-duty gear ratio, guard clearances, or harness attachments required to safely operate a metal blade. For clearing thick brush and woody saplings, a dedicated Husqvarna brushcutter or clearing saw is recommended.