1/1
42" 2-Stage Snow Thrower Attachment (Manual lift)
Product Description
After initial mounting brackets and pulley frame brackets are attached, the snow thrower can be removed without tools. Two 12” diameter serrated input augers pull in snow and then the high speed impeller propels the snow thru the poly chute. Replaceable wear plate and skid shoes. Can be raised and lowered from tractor seat. Operator can adjust discharge chute and control deflector pitch and has 180 degree rotation from the tractor seat. Wheel weights and chains recommended. Works with all Husqvarna tractors.
Product Information
Features
(1)
Features
(1)
Specifications
Specifications
Compare specifications and features with similar Husqvarna products.
Compare| Product data | 42" 2-Stage Snow Thrower Tractor Attachment (manual lift) SKU: 967 34 39‑01 |
|---|---|
GTIN-12/UPC-A | 085388645265 |
Fits To Model
Fits To Model
Garden Tractors
Disclaimer:
- 1Engine Power (As rated by the engine manufacturer): Gross power rating as per SAE J1995, at specified RPM
- 2Exhaust emissions (CO₂ EU V): This CO2 measurement results from testing over a fixed test cycle under laboratory conditions a(n) (parent) engine representative of the engine type (engine family) and shall not imply or express any guarantee of the performance of a particular engine.
