Maintenance


How to change the cutting blades on your Automower®

When the blades become worn, or when the tip of the grass blades begin to whiten and look frayed when cutting, you should change the blades on your Automower® to maintain performance. Make sure you always use original blades and screws, and always replace the screw at the same time as the blade when carrying out maintenance, otherwise the screw can be worn out and cause the blade to come loose when operating.

No Image Available

Step-by-step guide to changing blades

  1. Make sure the main switch is turned off
  2. Wear protective gloves
  3. Turn the Automower® upside down
  4. Rotate the skid plate so that its hole aligns with the screw for the blade
  5. Unscrew the blade. Use a straight slot or cross-tip screwdriver, preferably magnetic for easier removal of the screw
  6. Pry apart the skid plate and blade disc a little and remove the blade and screw
  7. Clean out any dirt using a dish-washing brush and a soft damp cloth
  8. Screw the new blade tight with a new screw. Always replace the screw as well as the blade.
  9. Check that the blades spin freely

Related articles

  • Automower X-line Led Lights
    Maintenance

    Treat your Husqvarna Automower® to an all-inclusive winter stay

    Give your robotic lawn mower a good service before putting it to winter rest at one of our Husqvarna dealers. We will store, and take care of your lawn mower, and make sure you get a longer service life out of it.

  • Maintenance

    How to change to a terrain kit on your Husqvarna Automower® 400-series

    When it’s slippery, or if you have slopes on your lawn, our terrain kit helps your Automower® to perform. This easy guide shows you how you can easily switch to a terrain kit. If you have an Automower® 300-series go here for instructions:

  • Maintenance

    How to change to a terrain kit on your Husqvarna Automower® 300-series

    When it’s slippery, or you have slopes on your lawn, our terrain kit helps your Automower® to perform. This easy guide shows you how you can easily equip your mower with a terrain kit. If you have an Automower® 400-series go here for instructions: