How to start a high-pressure washer - step-by-step gude
To get the best performance from your Husqvarna high-pressure washer, it is important to connect it properly to the water supply and bleed the system before use.
Following the correct set-up procedure ensures safety, prevents damage, and delivers optimal cleaning results.
Step-by-step: Starting a high-pressure washer
- Connect to a water source.
Attach your high-pressure washer to a reliable water supply. Ensure the hose is not kinked or blocked. - Bleed the washer.
Run water through the system to remove any trapped air. This step prevents uneven pressure and protects the pump. - Connect to power.
Plug the washer's power cord into a suitable power outlet. - Switch on the washer.
Turn the power switch to the ON (I) position. - Unlock the spray handle.
Disengage the power trigger lockout for safe operation. - Start cleaning.
Squeeze the power trigger on the gun/spray handle to begin using your high-pressure washer.
NOTE: The washer will automatically stop when you release the power trigger.
Pro tips for safe use
- Always check water connections before powering on.
- Never tun the washer without water supply - it can damage the pump.
- Use Husqvarna-approved accessories for the best performance.
Starting and powering on -FAQ
Why won't my pressure washer start?
Why won't my pressure washer start?
Check that it’s connected to power and water, the system is bled, and the trigger lock is disengaged. If it still won’t start, consult the user manual.
Do I need to bleed my pressure washer every time?
Do I need to bleed my pressure washer every time?
Yes. Bleeding ensures air doesn’t stay trapped in the system, which helps prevent pressure issues.
Why does my washer stop when I release the trigger?
Why does my washer stop when I release the trigger?
This is normal. Husqvarna high-pressure washers are designed with an automatic stop function to save energy and protect the pump.
Was this article helpful?
