Garden tractor maintenance

For your Husqvarna garden tractor to work optimally, it needs to be maintained, depending on a type of the product.

Some maintenance can be performed easily, and some needs to be done by the authorized local dealer.

Maintenance of a petrol-powered garden tractor

Do a check of a battery level. Charge the battery if necessary.
Clean the engine and the transmission.
Lubricate the product.
Make sure that the tire pressure is correct in all tires.
Replace the fuel filter on a garden tractor
Replace the air filter on a garden tractor
Examine the muffler and the heat deflector.
Replace the engine oil filter and engine oil on a garden tractor
Replace the spark plug on a garden tractor
Examine the transmission cooling fan.
Make sure that the product does not move when the pedals are in the neutral position.
Do a check of the switch for the cutting height lever.
Do a check of the switch for a forward and rearward pedals.
Clean the cutting deck, below the belt covers and below the cutting deck.
Do a check of a parallelism of the cutting deck. Adjust the cutting deck if necessary.
Examine the blades for wear and damage. Sharpen or replace the blades if necessary.
Examine the grass catcher and the switches for the grass catcher, if applicable.

Make sure that the tire pressure is correct in all tires.
Clean the cutting deck, below the covers and below the cutting deck.
Do a check of the PTO button.
Do a check of an operator presence control (OPC).
Examine the grass catcher and the microswitches for the grass catcher (applicable for TC models only).

Lubricate the garden tractor.
Make sure that the tire pressure is correct in all tires.
Clean the cutting deck, below the covers and below the cutting deck.
Do a check of the parallelism of the cutting deck. Adjust the parallelism if necessary.
Do a check of the PTO button.
Do a check of an operator presence control (OPC).
Examine the grass catcher and the microswitches for the grass catcher, if applicable.

Was this article helpful?