Usage


How to start your Husqvarna Rider

When starting your Husqvarna Rider, make sure you follow these simple steps.
Steering Wheel, R 216T AWD

 

Checklist when starting your Rider:

  1. Ensure the bypass arm is in the inner position
  2. If you have an AWD, there is one arm for each axle
  3. When you are seated the seat switch should be engaged
  4. Lift the cutting deck by pulling the lever to the transport position
  5. Engage the parking brake
  6. If the engine is cold use full choke
  7. Put the throttle in mid position
  8. When the engine starts, immediately release key
  9. Gradually disengage the choke

Related articles

  • Usage

    The Best Times to Mow Your Lawns and Trim Your Hedges

    There are few things that will transform your garden into a manicured botanical haven more than a freshly mowed lawn and well-kept hedges. While lawn mowing and hedge trimming seem like relatively straight-forward jobs, there are optimal times you can do them to help both yourself and your garden reap the maximum benefits. 

  • Usage

    How to install your Husqvarna Automower® robotic lawn mower

    Owning a Husqvarna Automower® is all about ease of use, which is felt instantly as even the installation process has been fine-tuned. Here’s a guide to how easy it is to install a Husqvarna robotic lawn mower.

  • Usage

    How To Stop a Chainsaw From Pinching

    Knowing how to prevent your chainsaw from pinching is crucial. Everyone can get pinched, but with a bit of caution and strategic operation, you can prevent kickback and serious injury.