Salesman image

Usage


How to mount a cutting deck on your Husqvarna Rider

Your Husqvarna Rider is a versatile machine that lets you change attachments depending on the task at hand. Mounting your cutting deck or attachment on the Rider is easily done and only takes minutes. Warning! Wear protective glasses when fitting the cutting unit. The spring which tensions up the belt may break and cause serious injury.

No Image Available

Checklist when mounting a cutting deck

  1. Place the Rider on a flat surface and apply the parking brake.
  2. Check that the lever for setting the cutting heights is in the lowest position and that the lifting lever for the cutting unit is in the mowing position.
  3. Push the equipment frame down and place the catch against the frame.
  4. Engage the belt in the belt holder.
  5. Push the deck in and put the front guide plugs in the grooves on the equipment frame, one on each side. Be careful to avoid trapping your hand.
  6. Push the unit in so that the interior plugs touch the bottom of the equipment frame’s grooves.
  7. Fit the drive belt around the drive wheels of the cutting unit. Ensure the belt is placed on the correct side of the belt tensioner wheel.
  8. Hook up on the height adjustment strut.
  9. Secure the collet spring.
  10. Fit the front cover.

Related articles

  • Hedgetrimmer
    Lawn and Garden

    The professional's guide to trimming hedges

    There is nothing better than seeing your hedges looking uniform, neat, and perfectly sculpted. 

  • Fuel can in front of rider
    Lawn and Garden

    What is fuel contamination and how to avoid it

    Fuel contamination is, as the name suggests, fuel that becomes contaminated or tainted with algae, water, rust, sediment and organic matter that collects toward the bottom of fuel tanks found at service stations.

  • PW 360 Clean Husqvarna Motorcycle
    Lawn and Garden

    10 time saving uses for a high pressure washer

    High pressure washers work like magic. Actually, they only seem to work like magic. There really is quite a bit of science behind how high pressure washers are able to do what they do.