1/3
Chainsaws

HUSQVARNA 135 Mark II

 
 
 
 
 
 
 
 
 
 
 
38 cm³
Cylinder displacement
2.1 hp
Output shaft power1
55 fts
Chain speed at max power
What's Included
HUSQVARNA 135 Mark II - 967 86 18‑16
Included
  • Nose type
    Sprocket nose
  • Spikes
    Mounted
  • Chain type
    S93G
  • Bar length (inch)
    16 in
Shipping & Returns

Husqvarna aims to deliver orders promptly, so changes or cancellations are not accepted once an order is placed.

Learn More

Husqvarna offers a refund for online purchases if you are not satisfied, minus any shipping or restocking fees.

Learn More

Warranty

At Husqvarna, we're committed to ensuring your satisfaction. Our warranty covers any defects in material or workmanship under normal use during the warranty period.

Learn More

Easy-to-use and powerful chainsaw with quick start

Get the job done the first time with the Husqvarna 135 Mark II. This reliable gas saw features Smart Start® and LowVib® technology for easy, comfortable use. Our proprietary X-TORQ® engine delivers superior performance, increased fuel efficiency and low emissions. And Air Injection™ technology improves engine life by expelling larger dust and debris particles before they reach the air filter.

Features

Specifications

Compare specifications and features with similar Husqvarna products.
Compare
16" 3/8 S93G SN, US/CA
967 86 18‑16
Engine

Output shaft power

1
2.1 hp

Cylinder displacement

38 cm³

Torque, max.

1.84 Nm

Torque, max. at rpm

8,000 rpm

Chain speed at max power

55 fts

Clutch engagement speed (±120)

4,000 rpm

Electrode gap

0.022 in

Idling speed

3,000 rpm

Ignition module air gap

0.012 in

Maximum power speed

9,000 rpm

Oil pump type

Automatic

Spark Plug

NGK BPMR7A
16" 3/8 S93G SN, US/CA
967 86 18‑16
Equipment

Recommended bar length, min

14 in

Pitch

3/8" mini

Recommended bar length, max

16 in

Chain type

S93G

Bar length

40 cm

Bar length (inch)

16 in

Sprocket type

Spur 6

Gauge

.050"
16" 3/8 S93G SN, US/CA
967 86 18‑16
Dimensions

Weight (excl. cutting equipment)

10.36 lbs
16" 3/8 S93G SN, US/CA
967 86 18‑16
Sound and noise

Sound pressure level at operators ear (LpA)

102 dB(A)

Sound power level, guaranteed (LWA)

116 dB(A)

Sound power level, measured

113 dB(A)
16" 3/8 S93G SN, US/CA
967 86 18‑16
Vibration

Equivalent vibration level (ahv, eq) rear handle

5.5 m/s²

Equivalent vibration level (ahv, eq) front handle

3.72 m/s²
16" 3/8 S93G SN, US/CA
967 86 18‑16
Lubricant

Oil tank volume

0.549 US pint

Lubricant type (Engine)

Husqvarna 2 stroke or equiv. at 50:1
16" 3/8 S93G SN, US/CA
967 86 18‑16
Emission

Exhaust emissions (CO₂ EU V)

2
804 g/kWh

Accessories

(11)

Here are suitable accessories for 135 Mark II. Looking for spare parts?

See all spare parts for 135 Mark II

Reviews

Services

Owner support

Manuals, handbooks, spare parts, guides, and related information for 135 Mark II can be found in the product support.
Product support for 135 Mark II
Disclaimer:
  • 1Output shaft power: Petrol products - Net power rating as per ISO 7293, Battery products measured comparable to petrol products
  • 2Exhaust emissions (CO₂ EU V): This CO2 measurement results from testing over a fixed test cycle under laboratory conditions a(n) (parent) engine representative of the engine type (engine family) and shall not imply or express any guarantee of the performance of a particular engine.

Frequently asked questions

How does the Husqvarna 135 Mark II differ from the 120 and 130 models?

While all three use a 38cc engine, the 135 Mark II is built for higher performance and easier maintenance. It produces more power (2.1 hp) compared to the 120 (1.88 hp) and features a significantly faster chain speed (55 ft/s vs 16 m/s on the 120). Additionally, the 135 Mark II includes a side-mounted chain tensioner and a quick-access cylinder cover, features typically found on professional saws that make adjustments and filter cleaning much faster.

What is the correct starting procedure for a cold Husqvarna 135 Mark II?

To start a cold 135 Mark II, first engage the chain brake by pushing the guard forward. Press the air purge bulb 6 times until fuel is visible. Pull the blue choke lever out fully. Pull the starter rope until the engine "pops" (usually within 5 pulls), then immediately push the choke lever in to the half-way/fast-idle position. Pull again until it starts, then blip the throttle to return to a normal idle.

What bar and chain combinations are compatible with the 135 Mark II?

The 135 Mark II is optimized for a 16-inch guide bar, but it can also be fitted with a 14-inch bar for increased maneuverability. It uses a 3/8" mini pitch chain with a .050" gauge (specifically the Husqvarna X-CUT® S93G).

How often does the Air Injection™ system on the 135 Mark II need maintenance?

The Air Injection™ centrifugal system removes up to 97% of dust before it reaches the filter, meaning you only need to clean the air filter every 10 hours of heavy use and replace once a season. To clean it, remove the quick-release cylinder cover, pop the filter out, and wash it with warm soapy water. Avoid using compressed air, as it can puncture the fine mesh and allow debris into the engine.

Why is my Husqvarna 135 Mark II stalling when I give it gas?

Stalling under acceleration is often caused by a dirty spark arrestor screen or stale fuel. First, inspect the small mesh screen on the muffler; if it's clogged with carbon, the engine can't "breathe." If the screen is clean, ensure you are using a 50:1 mix of fresh, ethanol-free gas. For storage longer than 30 days, we recommend using Husqvarna XP+ Pre-Mixed Fuel to prevent carburetor clogs caused by ethanol degradation.

About gas chainsaws

Husqvarna chainsaws offer unrivaled power and innovation. Our goal is to provide you with the best gas-powered chainsaw you can buy— whether you’re a homeowner cutting firewood or a tree care professional maintaining the urban forest.

Read more