Garden Tractors

Husqvarna TC242T

TC 242T 960510191

Husqvarna TC 242 T is a powerful tractor, developed for use in medium- to large-sized gardens. Equipped with integrated 320 L rear collector, pedal-operated, hydrostatic transmission, low vibe deck drive and ergonomic steering wheel.

  • Cylinder displacement
    656 cm³
  • Net power at preset rpm Energy
    10.1 kW
  • Cutting width
    108 cm
  • Transmission type
    Hydrostatic

FEATURES

Want to take a closer look? Learn more about the product in depth by exploring its design and features.

GT/YT tractors

Pedal-operated hydrostatic transmission

Easy speed and direction control with pedal-operated hydrostatic transmission. Separate pedals for forward and reverse.
YTH24V48

Reinforced Cutting Deck

The stamped cutting deck is reinforced with heavy flat-stock steel for added strength and durability on the leading edge and trim side. (48" shown)

Sliding, angled seat

Adjustable while seated; seat moves forward and down, or backwards and up.
GT/YT tractors

Air Induction

Innovative Air Induction mowing system that draws clean air from the top and bottom of the deck, enhancing air flow which results in greater grass lift and superior cut.
Air Induction Deck
GT/YT tractors

Pedal-operated hydrostatic transmission

Easy speed and direction control with pedal-operated hydrostatic transmission. Separate pedals for forward and reverse.

YTH24V48

Reinforced Cutting Deck

The stamped cutting deck is reinforced with heavy flat-stock steel for added strength and durability on the leading edge and trim side. (48" shown)

GT/YT tractors

Sliding, angled seat

Adjustable while seated; seat moves forward and down, or backwards and up.

Air Induction Deck

Air Induction

Innovative Air Induction mowing system that draws clean air from the top and bottom of the deck, enhancing air flow which results in greater grass lift and superior cut.

Specifications

Do you need further details to make the right decision? Learn more in the specifications section below. Locate your dealer

Cutting deck

Cutting width
108 cm
Nose roller
No
Anti-scalp wheels
2

Drive system

Drive method
Pedal-operated
Speed reverse max
3.5 km/h

Engine

Motor/engine manufacturer
Briggs & Stratton
Engine name
Intek
Cylinders
2
Generator
5&3 A
Power/fuel type
Gasoline
Oil filter
Yes
Net power at preset rpm Energy
10.1 kW
Net power at preset rpm
2600 rpm
Exhaust emissions (CO2 EU V)
830.04 g/kWh [1]

Equipment

Seat material
Vinyl
Front-End Protection
Available as accessory
Hour meter type
Digital with pre-programmed service intervals
Seat back height
High 15"
Steering wheel type
Standard
Collector
Included

Sound and Noise

Sound power level, guaranteed (LWA)
100.0 dB(A)
Sound power level, measured
98 dB(A)
Sound pressure level at operators ear
84 dB(A)

Transmission

Transmission type
Hydrostatic
Transmission manufacturer
Tuff Torq
[1] This CO2 measurement results from testing over a fixed test cycle under laboratory conditions a(n) (parent) engine representative of the engine type (engine family) and shall not imply or express any guarantee of the performance of a particular engine.
Husqvarna

Parts & Accessories

Select from a range of original accessories and parts to augment your product and enhance your experience.

FIND AN AUTHORISED HUSQVARNA DEALER

Our experts are ready to answer all your questions. Learn more about our services or find a dealer below.
You might need to accept that the browser uses your current location
Reset filters
You can find dealers by performing a search above or zooming in on the map