When and how to reinstall the Automower® charging station in an EPOS® wire free installation

In an EPOS® wire free installation, the charging station sometimes needs to be reinstalled on the map, for example after moving or replacing it, or if the mower has trouble docking or connecting to it. Reinstalling the charging station creates a new docking point on the map.

Note: The steps below apply to the charging station only. To reinstall the reference station, for example if it is moved or replaced, or to switch to or from EPOS® via Husqvarna Cloud, see When and how to reinstall EPOS® in an Automower® wire free installation.

When to reinstall the charging station

Reinstall the charging station on the map if:

• The charging station is being moved to a new spot on the lawn.
• The charging station is being replaced with a new unit.
• The mower is unable to dock or connect to the charging station.

How to reinstall the charging station

1. Before starting, ensure the charging station is placed at the correct location and properly connected.
2. In the Automower® Connect app, tap the Map section.
3. Select Charging station and tap Reinstall.
4. Follow the instructions.

Note:

• Other devices with Bluetooth® enabled can interfere with the pairing operation. Disable Bluetooth® on other devices if it causes interference during pairing.
• Reinstalling the charging station does not affect existing virtual boundaries. The app will guide you to reconnect existing transports to the new docking point. A new transport path is needed only if the charging station is moved to a location outside the work area.

Related articles

• Unable to create a docking point—Automower® with EPOS® wire free technology error message
• Set up and manage work areas, stay-out zones and transport paths with EPOS® wire free technology
• When and how to reinstall EPOS® in an Automower® wire free installation