How to clean a battery lawn mower

This is an article on how to clean a Husqvarna battery lawn mower. If you are looking for information on how to clean a Husqvarna ride-on mower, click here.

For more information on how to clean your Husqvarna petrol lawn mower, click here.

In order to keep your electric lawn mower in a good condition, make sure to clean it after every use.

Also, check if your product is clean before using it.

Cleaning the inner surface of the cutting cover

Issues occurring from dirty inner surface of the cutting deck:

• Poor cutting results
• Higher energy consumption
• Shorter battery runtime, due to increased resistance

Cleaning a battery-powered lawn mower

WARNING: To prevent accidental start, turn the safety key to 0, remove the battery, and wait a minimum of 5 seconds.

1. Remove and empty the collector if your lawn mower and the mulch plug if the product is equipped with them.
2. Put the product on its side.
3. Use a brush to remove leaves, grass and dirt.
   CAUTION: Do not use water to clean the product. Water can enter the battery or the motor and cause short circuit or damage the product.

Cleaning a lawn mower externally

Cleaning:

• Use a brush to remove leaves, grass and dirt.
• Make sure that the air intake on top of the motor is not blocked.
• Do not use a high pressure washer to clean the product.
• If using water to clean the product, do not flush water directly on the engine.
  CAUTION: Do not use water to clean the battery lawn mowers. Water can enter the battery or the motor and cause short circuit or damage the product.