Brushcutters
Parts, manuals and support for 555FRM
All the support you need for 555FRM. Manuals, spare parts, guides, how-to’s, and more.
Currently available
Go to 555FRM product pageChoose article number
To show you the right support, choose an article number from this list.
Where to find my article numberSupport content
Manuals & Documents
(16)
Manuals & Documents
(16)
Showing the latest version of manual and documents for 555FRM. For earlier versions, see link below to search all manuals & documents..
Troubleshooting & help
(10)
Troubleshooting & help
(10)
Warranty
Warranty
All you need to know about Husqvarna’s warranty policy and the service provided by us within the warranty period.
Warranty policy
Warranty service
Check your warranty
Login or create an account on MyPages to check your warranty period.
MyPages
Is your product broken?
If your product is broken and you wish to claim your warranty, it must always be examined by a dealer.
Find your nearest dealer
General questions
You can always contact Husqvarna for general questions about our warranty.
Contact Husqvarna
Specifications
Specifications
| Engine | Shredder blade, All ex US 50, CAN ,AUS, NZ Art no: 966 62 93‑02 |
|---|---|
Cylinder displacement | 53.3 cm³ |
Output shaft power | 2.8 kW |
Fuel tank volume | 1.1 l |
Fuel Consumption | 480 g/kWh |
Maximum power speed | 9,000 rpm |
Idling speed | 2,800 rpm |
Maximum rpm output shaft | 10,500 rpm |
Electrode gap | 0.5 mm |
Clutch engagement speed (±120) | 4,100 rpm |
Torque, max. | 3.5 Nm |
Torque, max. at rpm | 6,900 rpm |
Spark Plug | NGK BPMR7A |
| Capacity | Shredder blade, All ex US 50, CAN ,AUS, NZ Art no: 966 62 93‑02 |
|---|---|
Cutting width | 54 cm |
| Equipment | Shredder blade, All ex US 50, CAN ,AUS, NZ Art no: 966 62 93‑02 |
|---|---|
Grass blade | Shredder blade |
Harness | Balance XT2 |
Saw blade | Not included |
Trimmer head | Not included |
Handle type | Bullhorn |
| Dimensions | Shredder blade, All ex US 50, CAN ,AUS, NZ Art no: 966 62 93‑02 |
|---|---|
Tube diameter | 35 mm |
Weight (excl. cutting equipment) | 9.2 kg |
Tube length | 1,483 mm |
| Lubricant | Shredder blade, All ex US 50, CAN ,AUS, NZ Art no: 966 62 93‑02 |
|---|---|
Lubricant type (Engine) | Husqvarna 2 stroke or equiv. at 50:1 |
Lubricant type (bevel gear) | Mineral grease |
| Emission | Shredder blade, All ex US 50, CAN ,AUS, NZ Art no: 966 62 93‑02 |
|---|---|
Exhaust emissions (CO₂ EU V) | 1,000 g/kWh |
Exhaust emissions (HC average) EU | 52.86 g/kWh |
Exhaust emissions (CO average) EU | 239.74 g/kWh |
Exhaust emissions (CO average) EPA | 278.42 g/kWh |
Exhaust emissions (NOx average) EU | 1.72 g/kWh |
Exhaust emissions (NOx average) EPA | 1.69 g/kWh |
| Transmission | Shredder blade, All ex US 50, CAN ,AUS, NZ Art no: 966 62 93‑02 |
|---|---|
Gear ratio | 1.47 |
Drive gear angle | 35 ° |
| Vibration | Shredder blade, All ex US 50, CAN ,AUS, NZ Art no: 966 62 93‑02 |
|---|---|
Equivalent vibration level (ahv, eq) left handle | 2 m/s² |
Equivalent vibration level (ahv, eq) right handle | 1.5 m/s² |
| Sound and noise | Shredder blade, All ex US 50, CAN ,AUS, NZ Art no: 966 62 93‑02 |
|---|---|
Sound pressure level at operators ear (LpA) | 103 dB(A) |
Sound power level, guaranteed (LWA) | 121 dB(A) |
| Control | Shredder blade, All ex US 50, CAN ,AUS, NZ Art no: 966 62 93‑02 |
|---|---|
Connectivity | Not applicable |
Didn't find what you were looking for?
Use our Product Assistant to find support for your Husqvarna products easily. If needed, you are welcome to contact us for further assistance.