How to use a Husqvarna Automower® Coupler

The original Husqvarna Automower® Coupler helps you while installing, repairing, or extending the boundary wire for your robotic lawn mower. This coupler ensures reliable contact and moist protection, providing a robust and durable connection.

Steps to use an Automower® Coupler

1. Insert the wires

• Push each wire into one of the three holes at the bottom of the coupler. The below image shows the optimum way to connect the coupler for a good performance.
• Ensure the wires are properly inserted.

• When using the Husqvarna Automower® Heavy Duty Boundary Wire Reinforced, remove the outer protective layers before inserting the wire into the coupler. Specifically, peel away the outer black layer and the white mesh layer, as illustrated in the image below.

2. Secure the wires

Press the coupler with pliers. Start by pressing down in the middle part (1), then press down on the sides (2). Ensure the contact is securely closed.

3. Position the coupler

Ensure the coupler is placed close to the ground to prevent any damage from the robotic lawn mower during operation.

Related articles

• How to find and repair a wire break in your Automower® installation
• Tips to prevent wire break in an Automower® installation

Related videos

How to connect a guide wire to the boundary wire

How to repair a broken wire