How to do basic settings and calibration of Automower® robotic lawn mower with boundary wire

This guide applies to Automower® robotic lawn mowers with boundary wire installations.

Before starting your robotic lawn mower for the first time, a start-up sequence in the mower's menu must be carried out as well as an automatic calibration of the guide wire signal.

Basic settings and calibration for boundary wire installations

1. Put the mower in the charging station.*
2. Switch it on.
3. Select language, country, date, and time, if requested, and set a PIN code. For some models, a factory PIN code is necessary before you select a personal PIN code.
4. Start the mower to initiate the guide wire calibration. The calibration process is automatic.

The mower will now move away from the charging station and stop, while it calibrates the boundary wire loop signal and other mower settings. When the calibration is complete, it will start to mow.

*If you skip this step, the mower will generate a new loop signal and perform the calibration process the first time it leaves the charging station.

See also: Install Automower® with a physical boundary wire | How to test Automower® docking after wire installation