Cutting system blocked – Automower® error message

The message Cutting system blocked indicates that something is blocking the blade disc. Here are the common causes and solutions:

Mower stuck on an object

• Cause: The mower is stuck on an object like a tree root or trampoline leg.
• Solution: Remove the mower from the object and restart it.
• If it frequently gets stuck in the same spot, consider isolating the problematic area with an island or a stay-out zone.
• How to create stay-out zones with EPOS® wire free technology
• How to create an island in an Automower® installation (for physical wire installations)
• How to create a stay-out zone with AIM Technology

Grass or objects wrapped around the blade disc, wheels or under the cutting deck

• Cause: Grass or other objects are wrapped around the blade disc and need to be removed.
• Solution: Check for debris under the cutting deck, around the wheels and in between the body and chassis.
• For more information, see: How to clean your Husqvarna Automower® and Husqvarna CEORA™ robotic lawn mower.

Too high grass

• Cause: The grass is too high for the mower to handle.
• Solution: Adjust the cutting height on the mower and ensure the grass does not exceed the maximum height recommended for your Automower® model. See table below.
• For more information, see: How to change the cutting height on your Automower® robotic lawn mower

Too steep slope

• Cause: The slope is too steep for the mower to handle.
• Solution: Check that the maximum supported gradient for your specific Automower® model. See table below. If the slope is too steep, isolate it with an island or stay-out zone.
• Find out more about installation for steep slopes here.

Our Product Assistant can help you find the solution for your specific case.

Open Product Assistant