How to check and replace the auger belt on a battery snow blower
Keep your Husqvarna battery snow blower running at peak performance this winter by inspecting and replacing the auger belt before the snow season begins.
A worn or damaged belt can prevent your blower from clearing snow effectively—but with a few simple steps, you can fix it yourself.
Why the auger belt matters
The auger belt transfers power from the motor to the auger, helping your snow blower move snow efficiently. If the belt is loose, worn or broken, your machine won’t perform as it should.
Common symptoms of a damaged auger belt
- The snow blower feels weak or underpowered
- The auger stops spinning under light load
- The auger doesn’t rotate at all
If you notice any of these signs, it’s time to check or replace your auger belt.
How to check the auger belt
Safety first
To avoid accidental start-up, always remove the safety key, take out the batteries and wait at least 10 seconds before working on your machine.
Step-by-step inspection
- Remove the screws securing the auger belt cover.
- Carefully remove the auger belt cover.
- Inspect the belt for cracks, fraying or wear.
- If the belt looks damaged or loose, replace it immediately.
- Reinstall the auger belt cover and tighten the screws.
How to replace the auger belt
Safety first
To avoid accidental start-up, always remove the safety key, take out the batteries and wait at least 10 seconds before working on your machine.
Replacement steps
- Remove the screws and take off the auger belt cover.
- Detach the spring from the belt tensioner.
- Slip the old auger belt off the pulley.
- Remove the worn belt completely.
- Install the new auger belt, following the same path in reverse order.
- Reattach the belt tensioner spring.
- Reinstall the belt covert and tighten the screws securely.
Pro tip
Check your auger belt at least once per season—especially before the first snowfall. Replacing it early can prevent downtime and ensure your Husqvarna snow blower is ready when you need it most.