Congratulations on your new Husqvarna Aspire™ Pruner!

The battery level is at 20-30% when supplied to you. Charge it until the charging light stays green for maximum performance. 

Make sure the battery is removed from the product to prevent accidental start during setup, transport and storage.

1. Remove the protective cover. Make sure that the chain is tight on the bar. 
2. If tensioning is needed, turn the locking knob clockwise until it's tight.
3. Fill the oil tank with the included chain oil.

For hand-held use

1. Insert the battery.
2. Remove the bar cover.
3. Press the on/off button.
4. Push the trigger lockout and press the power trigger to start.

For use with pole

1. Attach the pruner to the pole/shaft and screw it tight.
2. Remove the bar cover.
3. Unfold the pole/shaft until it reaches maximum position, then screw it tightly.
4. Attach the battery to the pole/shaft.
5. Press down the power trigger lockout.
6. Press the power trigger to start.

1. Put on the bar cover.
2. Remove the battery
3. Hang your pruner for storage using the tailor-made storage hook included in the product box.

The Husqvarna storage system offers compact storage for not only your Aspire^TM products, but also other gardening tools.

Download our app for all the information you need, gathered in one place. Maintenance guide, parts, accessories, and more.