Grass Trimmer & Brushcutter1/10/2024
How to reload a trimmer line onto a grass trimmer or brushcutter
Depending on the product model, there are several different ways to reload a trimmer line onto your trimmer.
A15B trimmer line reload
- Take out the battery.
- Press the lock on both sides at the same time to take off the lid.
- Take out the empty spool.
- Put in the new spool loaded with the trimmer line.
- Rotate the spool so that the trimmer line is aligned with the slots on the trimmer head.
- Pull the ends of the line through the slots.
- Put the lid back in position on the trimmer head.
- Push the side button to elongate the trimmer line to the trimmer guard knife.
R25B trimmer line reload
- Take out the battery.
- Cut a couple of metres off the trimmer line.
- Align the arrows on the knob and the housing of the trimmer head as shown in the image.
- Pull in the trimmer line in the hole on the trimmer head until you see it on the other side.
- Make sure that the ends of the trimmer line are aligned and are equally long.
- Start winding up the trimmer head clockwise to pull in the trimmer line.
- The trimmer line should be as long as the distance to the trimmer guard knife.
Rapid Replace™ trimmer line reload
- Align
- Feed
- Twist
Battery trimmer line reload
- Take off the trimmer head by pressing its sides.
- Estimated cord length depends on the type of trimmer head and thickness of the trimmer line.
- Hook the line to the trimmer head and firmly wind it up.
- Follow arrows for winding the cord.
- Slip the ends of the trimmer line through the gaps.
- Put back the trimmer head.
Was this article helpful?