Using a Husqvarna Automower® robotic lawn mower at multiple locations
You can use a single Automower® robotic lawn mower at multiple locations. The number of installations possible per mower depends on your specific Automower® model.
If your mower model supports using profiles, it becomes even more convenient. Profiles allow you to save product settings related to different charging stations and work areas.
Number of installations per mower
The number of installations possible varies based on the model of your robotic lawn mower:
- Husqvarna Automower® 405X, 415X, 435X AWD and all Husqvarna Automower® NERA models: You can have up to 10 installations, which can be managed through the Automower® Connect app.
- Other Husqvarna Automower® models: Up to 3 installations are possible, which can be managed through the mower‘s display.
Please note that Automower® Aspire R4 does not support profiles.
Using one Automower® robotic lawn mower for locations that are geographically separate
If you wish to use the same Automower® robotic lawn mower, for example at both your primary residence and your summer house, where you’ll need a charging station and a physical boundary wire, or an EPOS™ wire free installation at each site. Once these installations are in place, you can easily set up two profiles in the Automower® Connect app or the mower’s display. These profiles can be switched between when you move your mower from one location to another.
Requirements
- An Automower® model supporting profiles.
- A charging station at each location.
- For physical boundary wire installations: a wire installation at each location.
- For EPOS™ wire free installations: EPOS™ via the Husqvarna Cloud* or a reference station at each location.
*EPOS™ via the Husqvarna Cloud is only available in selected markets.
Using profiles in multiple installations
With profiles, you can save groups of settings for different installations. Depending on your robotic lawn mower’s model, profiles can be accessed from the mower’s display or the Automower® Connect app.
Accessing profiles in the Automower® Connect app
- Go to More > Settings > Manage Profiles.
- To create a new profile, click on the Plus symbol on the top right. The settings of your active profile are copied to the new one.
- Name your new profile.
- Adjust the individual settings for this profile.
- Easily switch between profiles as desired, by clicking Set as active on the profile you want to activate.
Accessing profiles using the mower’s display
- Go to Menu > Settings > Profiles in the Automower® display.
- Select Use profiles.
- Select a profile (A, B or C).
- Name your new profile.
- Adjust the individual settings for this profile.
Read more about profiles here: Understanding profiles in Automower® installations.
Using one Automower® robotic lawn mower for adjacent but disconnected lawns
With a physical boundary wire
In lawns that are in close proximity, such as a neighbour’s lawn or when managing adjacent but disconnected lawn areas, you can designate one of the lawns as a secondary area. In this case, only one installation with a single charging station and one boundary wire is necessary. Note that the maximum length of the boundary wire is 800 metres (2624 feet). In this type of installation, there is no passage between the two areas. Therefore, you will need to manually move the mower between them and select Secondary area when starting the mower. Learn more about How to create a secondary area in an Automower® installation.
Requirements
- An Automower® model that supports secondary areas.
- A boundary wire installation covering the whole work area, including main and secondary work areas.
With EPOS™ wire free technology
In EPOS™ wire free installations, disconnected lawn areas are configured as separate work areas and managed through the Automower® Connect app. To operate in a separate zone, you must manually move the mower and select the correct work area on the map.
.
For personalised assistance with your Automower® robotic lawn mower, please contact your local Husqvarna dealer.
