Tools to use


Choosing the right saw chain: A few tips

If you want to get the most out of your chainsaw, it’s important that you choose the saw chain that is exactly right. Here are a few things to keep in mind.

When choosing a saw chain, you first need to know the pitch, the gauge and the number of drive links. Once you have these, everything else about the choice is basically about what you prefer.

Pitch is the average distance between two rivets on the saw chain. Its value (1/4", .325", 3/8" or .404") is commonly displayed on the guide bar. If you can not find it, our best advice is to let your dealer measure your old saw chain, as this is a bit tricky to do.

Gauge is the thickness of the drive links, and it is important to know this in order to make the saw chain fit correctly into the guide bar. The gauge (.043", .050", .058", or .063") is, like the pitch, probably displayed on the guide bar. If not, we recommend you to let your dealer measure the gauge on your old saw chain.

The length of a saw chain is determined by the pitch and the number of drive links. This is normally not printed anywhere on the bar or elsewhere on the product, so the links on the old saw chain need to be counted.

Matching teeth and muscles

Putting a more aggressive saw chain on a standard saw will never give you a better performance. It is like putting shark teeth on a piranha – the bite will not get any better.

If you make sure that your saw chain and saw match each other perfectly (aggressive saw chain for an aggressive saw, and so on), your cutting equipment will always deliver its maximum performance.

Edge Campaign Photo

Full chisel, semi-chisel, chipper

There are three basic designs of the cutters on modern saw chains: the full chisel, the semi-chisel, and the chipper.

The sharp corner of the full chisel cutters split wood fibers easily and provides the fastest, most efficient cutting in clean softwood.

The corner of the cutters on a semi-chisel saw chain are slightly rounded. This helps the cutter keep its sharpness longer, especially when cutting hard or frozen wood, or when working in dirty surroundings, where a full chisel saw chain would quickly lose its sharpness. The chipper saw chain is similar to the semi-chisel saw chain, but with an even rounder working corner.

To find a saw chain that exactly matches your chainsaw, please use the Husqvarna saw chain guide for reference.

Edge Campaign Photo

Related articles

  • 550 XP Mark II
    Tools to use

    Petrol Vs Battery Chainsaws - The Best Chainsaw For Every Job

    In years gone by, chainsaws were only available with a two-stroke engine. However, with advancements inlithium battery technology, there are now a multitude of battery powered and petrol powered variants. Both types of chainsaws have their own advantages, which may be preferable to some more than others.

  • Carving chair
    Tools to use

    Chainsaw Carving for Beginners

    The art of chainsaw carving is elaborate and exhilarating. The event became renowned in the 1980s after a world championship competition in the United States. Since then, chainsaw carvers like ‘Husqvarna Guy’ Bob, construct intricate designs resulting in truly unique and one of a kind pieces. 

  • H-team H-team
    Tools to use

    It’s all about the output: Introducing the Husqvarna X-Cut saw chain

    The Husqvarna X-Cut is the world’s first original Husqvarna saw chain. It’s designed for a single purpose: to optimize the performance of your Husqvarna chainsaw – and thereby maximize your output. This is how it works.