Hedge Trimmers
Parts, manuals and support for 522HS75S
All the support you need for 522HS75S. Manuals, spare parts, guides, how-to’s, and more.
Currently available
Go to 522HS75S product pageChoose article number
To show you the right support, choose an article number from this list.
Where to find my article numberSpare parts
Choose the part you wish to repair
HANDLE AND CONTROLS
Article
Art. number
Support content
Manuals & Documents
(2)
Manuals & Documents
(2)
Showing the latest version of manual and documents for 522HS75S. For earlier versions, see link below to search all manuals & documents..
Troubleshooting & help
(10)
Troubleshooting & help
(10)
Warranty
Warranty
All you need to know about Husqvarna’s warranty policy and the service provided by us within the warranty period.
Warranty policy
Warranty service
Check your warranty
Login or create an account on MyPages to check your warranty period.
MyPages
Is your product broken?
If your product is broken and you wish to claim your warranty, it must always be examined by a dealer.
Find your nearest dealer
General questions
You can always contact Husqvarna for general questions about our warranty.
Contact Husqvarna
Specifications
Specifications
| Engine | 522HS75S HEDGE TRIMMER Trim Cut Art no: 967 65 93‑03 |
|---|---|
Cylinder displacement | 21.7 cm³ |
Output shaft power | 0.6 kW |
Fuel Consumption | 620 g/kWh |
Fuel tank volume | 0.45 l |
Maximum power speed | 7,800 rpm |
| Dimensions | 522HS75S HEDGE TRIMMER Trim Cut Art no: 967 65 93‑03 |
|---|---|
Weight (complete product w/o side packed articles) | 5.1 kg |
| Equipment | 522HS75S HEDGE TRIMMER Trim Cut Art no: 967 65 93‑03 |
|---|---|
Knife length | 75 cm |
Teeth opening | 30 mm |
| Emission | 522HS75S HEDGE TRIMMER Trim Cut Art no: 967 65 93‑03 |
|---|---|
Exhaust emissions (CO₂ EU V) | 1,344 g/kWh |
| Vibration | 522HS75S HEDGE TRIMMER Trim Cut Art no: 967 65 93‑03 |
|---|---|
Equivalent vibration level (ahv, eq) rear handle | 5.7 m/s² |
Equivalent vibration level (ahv, eq) front handle | 5.8 m/s² |
| Sound and noise | 522HS75S HEDGE TRIMMER Trim Cut Art no: 967 65 93‑03 |
|---|---|
Sound power level, guaranteed (LWA) | 102 dB(A) |
Sound pressure level at operators ear (LpA) | 93 dB(A) |
| Capacity | 522HS75S HEDGE TRIMMER Trim Cut Art no: 967 65 93‑03 |
|---|---|
Cutting speed | 4,400 cut/min |
| Control | 522HS75S HEDGE TRIMMER Trim Cut Art no: 967 65 93‑03 |
|---|---|
Connectivity | Not applicable |
Didn't find what you were looking for?
Use our Product Assistant to find support for your Husqvarna products easily. If needed, you are welcome to contact us for further assistance.