How to change an equipment belt on a ride-on lawn mower

A worn or damaged belt can prevent your Husqvarna ride-on lawn mower from cutting properly.

To keep your lawn mower performing at its best, check the belt regularly.

If you notice cracks, fraying or significant wear, replace it as soon as possible.

A broken belt will stop the cutting deck from working completely.

NOTE: The video instructions apply ONLY for R200!

Safety first

Before doing any maintenance, make sure your lawn mower is safe to work on.

• Turn off the engine and remove the key.
• Allow the engine to cool down completely.
• Wear protective gloves.

Tools you will need:

• Protective gloves
• A socket wrench
• A new replacement belt for your ride-on lawn mower model

How to remove the equipment belt

1. Lower the cutting deck.
2. Remove the front cover using the supplied tool.
3. Loosen the spring tensioner.
4. Loosen the belt tensioner.
5. Release the equipment belt.
6. Pull the main belt off the intermediate pulley. The tension on the main belt loosens when the cutting deck is in the servicing position.
7. Remove the equipment belt from the intermediate pulley.

How to install a new equipment belt

1. Install the equipment belt from the front of the product.
2. Place the belt into the bottom groove of the intermediate pulley.
3. Place the spring tension back in its place.
4. Put back the front cover.
5. Return the cutting deck in the mow position.

Belt maintenance tips

• Check the belt regularly for cracks, fraying or signs of stretching.
• Clean grass and debris from the belt and pulleys to prevent slipping.
• Make sure the belt tension is correct—not too loose or too tight.
• Avoid mowing heavy, wet grass that puts extra strain on the belt.
• Store the lawn mower in a dry place to prevent the belt from drying out or cracking.
• Replace the belt as soon as you notice visible wear.