How to install and remove a 3-in-1 nozzle on a high-pressure washer
Some Husqvarna® high-pressure washers come equipped with a spray lance featuring a 3-in-1 nozzle.
This versatile nozzle lets you switch between different spray patterns without needing multiple attachments.
To ensure proper installation and removal, the spray lance must always be in the correct position. Thankfully, the symbols on the spray lance make the process simple and intuitive.
Installing a 3-in-1 nozzle
- Align the spray lance
Turn the spray lance until the nozzle symbol lines up with the mark on the gun/spray handle. - Insert the nozzle
Hold the spray lance with one hand, then push the 3-in-1 nozzle into place until it locks securely. - Check alignment
Ensure the tab with the square shape is aligned correctly with the square notch on the lance.
Your 3-in-1 nozzle is now installed and ready to use.
Removing a 3-in-1 nozzle
- Align the spray lance
Rotate the spray lance again until the nozzle symbol aligns with the mark on the gun/spray handle. - Release the nozzle
Press the button on the spray lance and gently pull out the 3-in-1 nozzle.
Benefits of a 3-in-1 nozzle
- Convenient—no need to switch between multiple nozzles.
- Versatile—adjust spray patterns for different cleaning tasks.
- Time-saving—quick installation and removal.
3-in-1 nozzle FAQ
The 3-in-1 nozzle typically includes three spray patterns: a high-pressure jet for tough dirt, a wider fan spray for general cleaning, and a low-pressure setting for rinsing or detergent application.
Yes, when set to the low-pressure mode, the 3-in-1 nozzle allows detergent to be applied evenly to surfaces. Always use Husqvarna®-approved detergents for best results.
Yes. The 3-in-1 nozzle delivers the same performance as standard nozzles, with the added benefit of switching spray patterns quickly without changing attachments.
You’ll hear a click when it locks into position, and the square tab will align with the square notch on the spray lance.
Yes. Rinse it with clean water after use, check for blockages and store it in a dry place to ensure a long lifespan.