HUSQVARNA 455 Rancher
I had my 455 Rancher for about 5 years now and I cut 6-8 cord a year plus other misc stuff around the house. This saw is as reliable as the year is long. Everything still original except chain. Starts cold 3rd-4th pull everytime. Only problem in 5 years is just recently oiler stopped working. Found you tube video and was able to fix myself in 30 minutes. Never had a problem with bar oil leaking as some report. All I can say is....WORKHORSE! Love this saw!! considering one of their trimmers now.
October 13, 2014
I want to buy a saw and almost bought the 455 Rancher but read the reviews. I see primarily 2 issues throughout the reviews which are scored cylinders and bar oil leaks. The Service Rep answers all the complaints about cylinder scoring by scolding the consumer! Not a single response to their saws leaking that expensive bar oil all over the place! Just tells me they don't care about customers and only about covering up the leak issue. In other words ....poor customer support! They should explain the oil leakage issue and cause repair for each instance. Most important stop scolding the consumer. If you can't answer the oil leakage issue don't bother reprimanding customers for cylinder scoring. Easy to point the finger than resolve the leakage issue?
September 26, 2014
Nice saw, good price, great power!
Read a lot of reviews before purchasing, and a lot of them said hard to start, I'd say it was about 4 out of 10 reviews were bad. A friend had one and said he loved his, so I decided to purchase it. While I don't have a lot of time on the saw, it been easy to start, even after running it and shutting it down for awhile, then trying to restart, it been fine to start.
August 31, 2014
I have had this chainsaw for five years now and has not mist a beat. Love the weight, power and ease of use. I use it around the house for medium size pine trees. I plan on having this saw for a while.
August 23, 2014
The right bar for the right job
I have owned this saw for 5 years. The power head is very well built with lots of power as long as you maintain it. I live in Alabama and we have some very hard wood. I am originally from Washington state. I grew up on Stihl but I tried the Husky. I think the 20" bar and a 3/8" chain is a little ambitious for the type of hardwoods we have in the south. I believe it would be well suited for the Pacific Northwest. If you live in the South, get the 18" bar either 3/8 or .325 will work well for you.
Remember to keep up with your maintenance and it will last you a life time!
August 10, 2014
Best chainsaw I have ever owned
I don't make a living out of cutting wood yet I use it often. Never had an issue.
June 28, 2014
Saw is Good but the bars are junk
I have a brand new 455 saw with a 20 inch bar that I used one time. The nose sprocket on the bar froze after going through maybe a half tank of gas even though it I greased the sprocket holes before I started. The bar sprocket won't move at all rendering the bar useless. I was under-cutting a 22 inch diameter log - dried wood, from a dead tree when it froze. I have been using chain saws for 40 years now from a number of different manufacturers and have never had this problem before other than with the Husqvarna bars in the last couple of years. I have a 445 Husqvarna as well that had the same problem with a 16 inch bar - the bar sprocket froze undercutting a log from a dead tree. Both of the saws have the 0.050 bars on them. Husqvarna has both 0.050 and 0.058 bars. Even brand new from the package the bar sprockets don't spin freely on the 0.050 bars so my guess is that either they are intentionally using the same bar sprocket on both the 0.050 and 0.058 bars or someone at the factory is assembling them with the wrong sprockets. I don't think the sprocket would freeze if all you were cutting was green wood but if you are undercutting dry wood be prepared to replace the bar.
It's kind of frustrating to be cutting wood 15 miles from home when the bar freezes.
Guess I will get an Oregon bar for it.
June 27, 2014
After much debate over which saw to purchase, Echo or Sthil. I had never even considered the Husky as they called it in the shop, but after talking with the shop mechanic about the different saws, he recommended the Husky 455 as I wanted something with a little more meat to it.
After one days use and fourteen trees, I feel as through this was the right saw for what I needed. It's well balanced, plenty of power and very smooth for a engine of this size.
I look forward to using this saw for quite some time.
June 8, 2014