Maintenance


How to change to a grass blade on your battery brushcutter

Having the right tools for the job when gardening is of course essential for getting a good result. Changing from a trimmer line to a grass blade on your Husqvarna brushcutter is easy; just watch the video and follow these simple steps. A bench is always useful to work on, and it prevents you from dropping screws in the grass.

No Image Available

Step-by-step guide when changing to a grass blade

  1. Remove the battery.
  2. Fold the handle bar and turn the brushcutter, so that it rests on the handles.
  3. Remove the trimmer cover and the cord holder.
  4. Use a flathead screwdriver to loosen the blue cord feeder by pressing it straight out.
  5. Use the socket spanner to remove the locking nut while holding the support cup.
  6. Remove the support cup.
  7. Place the drive disc in its place.
  8. Place the grass blade on top of the drive disc.
  9. Place the support cup over the blade.
  10. Place the support flange in the cup.
  11. Put the lock nut in place. Put the hex wrench in the small hole on the top of the bruschcutter gear head. Turn the blade until the hex wrench locks in place. Then use the socket spanner to tighten the lock nut.

Related articles

  • Lawn and Garden

    How to change to a terrain kit on your Husqvarna Automower® 400-series

    When it’s slippery, or if you have slopes on your lawn, our terrain kit helps your Automower® to perform. This guide shows you how you can easily switch to a terrain kit. If you have an Automower® 300-series go here for instructions:

  • Lawn and Garden

    How to change to a terrain kit on your Husqvarna Automower® 300-series

    When it’s slippery, or you have slopes on your lawn, our terrain kit helps your Automower® to perform. This easy guide shows you how you can easily equip your mower with a terrain kit. If you have an Automower® 400-series go here for instructions:

  • Lawn and Garden

    How to regularly clean your Husqvarna Automower®

    It is important to keep your Automower® clean for the best performance and a long service life. A mower with a lot of clippings attached also handles slopes poorly. It is recommended to clean it using a brush, spraying with water, or use a damp cloth. Never use running water, high-pressure washer, or solvent, when cleaning your Husqvarna Automower®.