The Husqvarna PG 530 is a planetary grinder available in both single and three phase versions with unmatched capacity, excellent for residential and light commercial purposes. The PG 530 combines the latest technology to deliver more power and performance than any other triple head planetary machine available in its class.
Applications range from concrete floor preparation and repair to grinding and polishing of concrete floors as well as the repair and polishing of terrazzo and other natural stone.
High power machinery capable of delivering extremely high production rates, increasing profit and saving valuable time.
Superior industrial strength construction delivers an atrractive yet robust machine.
Multi purpose application possibilities. A highly versatile line of equipment.
Comprehensively tried and tested on actual projects, ensuring technological effectiveness in the field in most applications and situations.
Low tool and maintenance cost per square meter/foot.
A unique 5-way sealing mechanism protects bearings and internal parts from aggressive concrete dust and slurry, which contributes to a longer machinery service life before first service and between subsequent services.
Husqvarna’s Redi Lock™ is an instant and hassle-free system for changing diamond tooling. Robust construction ensures maximum protection and life of your diamond tools.
The PG 530, PG 680 and PG 820 are excellent machines for all kinds of large polishing and grinding applications. They are perfect for both wet and dry grinding. Their triple-headed grinders deliver more downward pressure and power to grinding heads, which gives a very stable operation over undulating surfaces.
Low impact on operator’s body when handling due to ergonomic frame and handle design.
Best in class in terms of performance, reliability and longer machinery service life - before first service and between subsequent others.
Solid hard rubber wheels help the machine to deliver smoother cutting and polishing.
The control box is clearly marked and easy to use. Regulates and controls various functions on the machine.
Under no circumstances may the machine be started without having read the operators manual and paid special intensions to the safety instructions found in the operator’s manual. Should the user fail to comply with these, Husqvarna Construction Products Sweden AB or its representatives are free from all liability both directly and indirectly. Read through these operating instructions and make sure that you understand the contents before starting to use the machine. Should you, after reading these safety instructions, still feel uncertain about the safety risks involved you must not use the machine. Please contact your dealer for more information.
To prevent damage to the Grindng shrould when unpacking and transporting ensure to follow the recommended procedure as outline in the supporting video.
Position grinder on the working area. Set handle in upright position (illustrated right).Pull back on handle using the kicker bar to lift grinding head off the ground.Lay machine back on the ground.WARNING!Ensure STOP/RUN switch is in STOP position as unintentional starting of machine while changing discs can result in serious injury.
Have a set of gloves ready, as diamonds can get very hot during dry grinding applications.WARNING!Ensure STOP/RUN switch is in STOP position as unintentional starting of machine while changing discs can result in serious injury.
As different applications require different selections of diamond tools, there will be many occasions when the grinding discs need to be changed.Place diamonds as shown in the Redi Lock™ diamond holder disc and secure by tapping lightly. Assembly discs on planetary head lock screws by slightly rotating it.NoteWhen using the machine, each grinding head should always have the same diamond type and number of diamonds as the other grinding heads. Each grinding head must have diamonds the same height as the other grinding heads.WARNING!Ensure STOP/RUN switch is in STOP position as unintentional starting of machine while changing discs can result in serious injury.
Adjust rubber skirt so that a good seal is established between the floor and head of the machine. Ensure join in skirt is at the front of the machine to allow for better air flow. Setting of the skirt is essential to obtain good dust extraction and minimise the possibility of airborne dust.WARNING!Ensure STOP/RUN switch is in STOP position as unintentional starting of machine while changing discs can result in serious injury.
Set handle to most comfortable working height using adjustment lever.NoteIt is recommended that this height be set as close as possible to the height of the operator’s hip bone. When the machine is running, there can be a slight grinding force/pull to one side that can be felt through the handlebars. Use the hip to resist this force instead of trying to control this through the arms (such positioning will be much easier for the operator using the machine over prolonged periods of time).
-Connect the hose to the PG Grinder.-Connect the hose to the DC.-Attach the plastic bag to the DC, if this is not already in place.-Plug in the power cable to the DC.NoteThe power cable dipictad in the footage may vary from region to region.
Ensure the STOP/RUN switch is set on Stop (rotate counter clockwise).Plug power supply to machine. Only turn power on at plug once fully connected.Disengage Emergency Stop button (twist clockwise).Depress Power button. On doing so, a soft “clunk” should be heard to come from within the electrical cabinet. This indicates the line contactors have engaged, supplying power to the drives/frequency converters.NoteThe power cable dipictad in the footage may vary from region to region.NoteAlways have the DC Vac running before starting to run the Grinder
Standing behind machine with handlebars set as described earlier, apply a small amount of downward pressure on the handle. Switch the machine to run mode using the STOP/RUN switch on the control panel.The machine should start smoothly and accelerate to the selected speed over a period of 5 seconds.
On the control panel there is a FORWARD / REVERSE and Speed dial knob. Generally, when starting the machine for the first time on any given application, it is advised the speed setting should not exceed 7, initially. When the operator is comfortable with the application, speed may be increased.The machine should start smoothly and accelerate to the selected speed over a period of 5 seconds.
While in same direction rotation, the diamonds closer to the centre of the machine move in the opposite direction to the planetry rotation.The diamonds toward the outside move in the direction of planetary rotation.As the outer diamonds are being accelerated in the direction of planatery rotation they grind more aggressively creating an outer band where the machine cuts more effectively.
When the machine is moved forward, the middle zone is still ground more thoroughtly then the outer zones but not as much as in the case of counter rotation. The end result is a more even cut through the middle zone when compared to the outer zones, which is less prominate then in counter rotation.
All planetary grinders remove more stock from the middle of the grinder. Always overlap the outer zones to ensure efficient and clean grinding.Remember to change the grinding rotation each pass to maintain a uniformed direction over the floor.
When the machine is in operation it will slightly pull to one side. This force is determined by the planetary head rotation. When the head of the machine pulls in to the wall the operator will get a much closer cut to the wall.A comfortable operating position should allow the handle bar to rest firmly against the operator´s hip.
The way diamond segments are set-up on the grinding heads of the machine will also greatly influence the performance of the machine, the productivity levels and also the finished floor quality.
There are basically two types of diamond configurations that can be used when using the Husqvarna PG grinders:Full set of diamonds. When there are diamonds placed at all positions on the diamond holder discs.Half set of diamonds. When there are diamonds placed at each alternating positions on the diamond holder discs.By changing the way the diamonds are set-up on the diamond holder discs, an operator can significantly affect the performance of the machine and therefore the finished product.
A full set of diamonds will cut a flater floor when compared to a half set of diamonds.The full set will remove all the high spots instead of carring with the surface of the floor and droping down into the low or softer spots.With a full set of diamonds the highest level of flatness will be achivied.
A half set of diamonds will follow the surface of the floor.The grinder can be placed on an uneven surface and yet still find a stable footing. The half-set diamond configuration should be used when a flat floor is not required.The half set will carry over the high spots and into the low spots, which is ideal to remove floor coatings or glues where optimum flatness is not the overall objective.
As well as using full set and half set, the operator can also choose from double or single segment tools. This will enable the operator to have control over both his tool economy and productivity. Double segments: A double segment tool consists of two diamond segments on one Redi Lock™ shoe.Single segments: A single segment tool consists of one diamond segments on one Redi Lock™ shoe.
Double segments are more commonly used as there is less preasure on each diamond segment resulting in lower cost and longer tool life. In principle double segments are used on softer concrete to prevent unwanted excess removal of the concrete stock.
A single segment is more commonly used on very hard surfaces as this increases the grinding pressure per diamond segment. This will result in a higher productivity and more aggressive concrete stock removal.A significantly shorter tool life can be expected when using single segments due to the increase in segment preasure.
Find your local Husqvarna dealer using the dealer locator.