Can´t find what you are looking for? More documents can be found under
Manuals and Downloads
You can also read our
contact a dealer
Husqvarna 550 XP® is developed for tree care professionals and skilled land owners. The saw has a ground breaking design and is loaded with innovative solutions for efficient, convenient operation. Our unique X-Torq® engine technology provide more power where you need it, up to 20% less fuel consumption and 75% less exhaust emission
(based on 69 reviews)
of respondents would recommend this to a friend.
Most Liked Positive Review
Light, powerful, nimble. The auto-tune really works well, too. For this kind of weight and power, this saw is very versatile. I have had the 20" bar fully buried in...Read complete review
Light, powerful, nimble. The auto-tune really works well, too. For this kind of weight and power, this saw is very versatile. I have had the 20" bar fully buried in pine, and the saw handled it without issue - full RPMs.The handles are very well isolated from vibration as well. Starts easily, sips gas. I don't think you can find a better 50cc saw at any price.
Most Liked Negative Review
Could be great
This saw could be really great one day, however I feel like it was rushed to market and now some of us are having to pay the price, and on a pro saw that...Read complete review
This saw could be really great one day, however I feel like it was rushed to market and now some of us are having to pay the price, and on a pro saw that you should be able to depend on, this is unacceptable.The saw looks and feels great with good balance characteristics but it can't make up for the problem areas.The saw I received out of the box would not oil, so after waiting 3 weeks on a stripped oiler gear, I finally was able to get to work. This issue should have been caught in QA and should have prompted action on the company's part. Were it me, I would have issued an apology and sent a gift box or something to my customer, instead, I was met at every turn with people who only seemed intent on protecting the company rather than being an advocate for my issues. In fact, this saw would not (and still will not) stay running at idle until it is hot. I was told that it was supposed to run like this. Really? A pro saw will not stay running until it is hot? Laughable. My Stihl 441CM exhibits none of these issues.After several minutes of pressing bulbs, switching switches, furiously yanking the cord, babying the saw off idle and profuse swearing you can get to work, where quite often the saw will lay down on you and die mid cut.I use ONLY fresh, Premium, ethanol free gas in all of my engines mixed with XP oil so I really do not wish to hear this nonsense again from another rude company rep.In the end, after MANY calls to local and corporate reps, I am defeated by this corporate giant, stuck without recluse with a saw that I truly wish would start and run reliably. I really like the feel of the saw and don't want to seem bitter, but its precisely because I am so frustrated with the lost potential that this saw has.While I could just go buy another Stihl, I would honestly rather Husqvarna just swap my saw for one that works reliably. I don't feel this is unreasonable, but then with corporate profit and shareholder returns more important than a happy customer these days, I, like many others it seems, will have to hang our heads, pound sand, and live with regret on this purchase.Too bad, this saw could have been really great.
Reviewed by 69 customers
Displaying reviews 1-10
Back to top
Previous | Next »
About Me Do-It-Yourself
Comments about HUSQVARNA 550 XP®:
This is a very powerful little saw. I,m very impressed with the performance of this saw. I don't have any starting issues hot or cold. This I my first husqvarna after owning 4 pro saws. All my pro saws have been very reliable but this 550xp`s performance is incredible. I would not recommend it for a beginner. This is the most dangerous saw I have run do to it`s rpms and power to weight ratio. This is my go to saw for everything up to 18 inches. Larger than 18 inched I might pick up the 15 pound 6 hp saw. It does not do well noodling. The long strands clog the saws sprocket area and bog the saw out. I do not know the durability of this saw yet. Very impressed overall !!
Bottom Line Yes, I would recommend this to a friend
Was this review helpful? Yes / No
- You may also flag this review
Great saw once you figure out its quirks
I have had this saw for over three years now and finally decided to post a review. Maybe it can help people who have been dissatisfied with this saw. When I first purchased 550XP I had a lot of issues with the saw flooding and not wanting to start. I went through some very frustrating times including several hours of missed productivity in the woods and regretted spending the money for a "professional" chainsaw. All that being said, after a few years and figuring out the quirks of this saw I now love it.My first mistake was trying to cut before the saw was completely warmed up. My old chainsaw would warm up and be ready to cut within about 20 seconds. This one probably takes closer to 2 minutes (with the throttle lock on following the cold start procedure in the manual). Once it is completely warmed up, it will purr rather than spit and sputter. That is how I know it is ready to cut. If you blip the throttle to disengage the throttle lock too soon it will bog and often die when giving it gas. If that happens, it will usually flood and be a real pain to get started again. I have also found that shutting the chainsaw off between cuts is not worth the risk of it not wanting to start again. Instead of shutting it off, I will just engage the chain lock and set the saw down and let it idle while I position a log or whatever. The saw, between cutting and idling, will usually run for right around an hour on a tank of gas. I find that is is best to let the saw cool down for a while before refueling and then again letting it warm up completely before cutting again.This may all sound like a hassle, but it honestly hasn't been an inconvenience (especially when compared to having to wait an hour before you can get your flooded chainsaw to start again). The saw cuts very well and is light and maneuverable. It has all the power I will ever need and it doesn't make my hands go numb from vibration. As long as I am careful it works very well.
Best Saw Ever...when it runs
from Evergreen, CO
Running it around 8,000ft in Evergreen/Conifer area. Use only HP Ultra at 45:1 using premium ethenol free gas (via Brad's Conoco) or Trufuel premix.When this saw runs, there is simply no better saw for trees up to 18" or so. It's a light weight limbing weapon. Great AV. Crazy fast acceleration.However, my 2012 550xp constantly has hot start problems when running in warm temps. I follow the purge>choke>high idle sequence and no dice. This would be a deal breaker for a home owner saw and is unacceptable for a pro saw.This is one of many known issue with these saws.Fortunately my backup/big saw is a 15 year old Dolmar 7900 that always starts and always runs.I'm going to probably sell this saw and try to find a like new 346xp free of any autotune problems. Also, listen up Husqvarna. Allow the owners an easy way to upgrade the autotune software for free, at home, like any other software controlled device.
Bottom Line No, I would not recommend this to a friend
(1 of 1 customers found this review helpful)
Done with Husqvarna for now
I bought this saw to replace an old 032. This had a similar feel. The weight and balance was exactly what I was looking for. I use saws very little. I cut some firewood to each year to heat the house. My first saw was 2014. I used it a little and in 2016 with less than 5 hours of run time, the piston burned up. Husqvarna / Dealer did me well and fixed it under warranty. I asked a lot of questions because I really want the saw to last. The first part of 2017, the saw locked up. I took it to the dealer and found it had a stuck piston. They un-stuck the piston, charged me a service fee, and I was off to cutting again. The saw then burned up on the first day I went to use it. I took it back to the dealer. The saw had 1.5 hr's of run time. Now it is a $350-$400 repair. I am getting a second opinion on whether it is a defect or not. I am at a loss. I have used Husqvarna premix and the best answer I can get from the first dealer is I let it idle to much. I personally question the carb / chip combination and whether it is controlling the fuel mixture correctly. I have never had a saw burn up until this one and this one has been in the shop three times now and I have not even passed the break in period.
Service and delivery comments:
Customer service was not helpful. The best answer I could get was that the saw needs to go to a dealer. I was hoping that I could send it in to Husqvarna for a second opinion, but Husqvarna will only talk to the dealers and get their opinions from the dealer. I found a second dealer and have not heard back yet.
(2 of 2 customers found this review helpful)
Will NEVER buy Husky again. I got hosed.
By Robert Goad
from North Idaho
Used it to cut less than 5 cords of softwood
from Québec, canada
About Me Novice
You should burn you money instead of buying such a problem!! Third piston in it over a month, they last about three thank each. If that is a pro chain saw then pro don't work much!
Won't Start at Altitude
from Bailey, CO
Spent all the first day of ownership trying to get it started for the first time. My neighbor, a mechanic, came over and we determined it was flooding. This is an auto tune saw and I was starting it at 8800 feet. We dried it out and finally got it started. I ran it for several minutes at load, per the manual to set the auto tune, per the manual. The next time I went to start it, same thing, flooding. After fiddling and removing the spark plug several times, I finally got it going (30-45 mins).Now the good news... Once running, it cut great. I had a rather big tree for my area (20" ponderosa pine). The saw is balanced well and easy to handle. It had all the power I needed to drop the big tree and cut about 15 sections.I stopped the saw and topped off oil and gas. Then tried to start - nothing. A couple of times it tried but after another 30 minutes of yanking on the cord, I called Husqvarna customer service. What a joke. They only do basic troubleshooting. The girl didn't listen to what I told her and launched into her script. When I told her for the third time it was brand new, she told me I should return it to the dealer. So now back to the dealer who is 3500 ft lower than me. I just want something that works. I had high hopes for auto tune but it looks like a bust. Does anybody have suggestions on a good saw for 8500-9500 feet?
The best saw I have ever purchased
from Faber Va
I have purchased multiple husqvarna saws over the years and this is hands down my favorite saw. It is very light and feels extremely nimble. I have an 18" bar and use it for 80% of my firewood cutting duties. It is also extremely fuel efficient. It starts on the 3rd pull cold and as long as you follow the warm starting instructions, fires up first pull. Excellent power for the weight of the saw as well. Saw rev's very quickly- real joy to use. Vibrations control is excellent too..
I recommend this saw to anyone
from Huntington Wv
About Me Professional
Excellent power, light weight, balanced and cuts great. Fun saw to run because of the high rpm power and cutting ability of such a small saw. Pricey but worth it. If you cut a lot this is a must have for you business or farm.
from Virginia, USA
Unfortunately the worst saw I have ever owned. Was hard to start from the beginning, eventually not starting at all. Bogged when cutting. Stalled when through with a cut. Itermittently would not prime. Had it in the shop 3 times with only ten hours on it but whatever the problem was continued on. Carb was replaced, vent was replaced, decompression valve was replaced, computer was reset. The dealer, who I respect, refunded my money but they are getting no satisfaction from Husqvarna, they are having to eat it.
The text you enter here is displayed at the end of the form.
Want to take a closer look? Learn more about the product in depth by exploring its design and features.
The flip-up tank cap is easy to open and close when refueling.
Delivers lower fuel consumption and reduced exhaust emission levels in accordance with the world´s most stringent environmental regulations.
AutoTune gives optimal engine performance throughout automatic engine setting.No time spent on carburetor adjustments. It compensates fordifferent fuels, altitude, humidity, temperature and clogged air filter.
Centrifugal air cleaning system removes larger dust and debris particles before reaching the air filter. This results in reduced air filter cleanings and improved engine life.
Do you need further details to make the right decision? Learn more in the specifications section below.
Locate your dealer
Select from a range of original accessories and parts to augment your product and enhance your experience.
Husqvarna's walk lawn mowers give you better performance and excellent cutting results.
Husqvarna’s chainsaws are constantly tested under harsh conditions that require power, precision and durability, so that you can work both faster and safer.
With a high efficiency cutting deck and turn-on-a-dime maneuverability, the Husqvarna Zero-Turn mower makes short work of tall grass.
The MSRP (Manufacturer's Suggested Retail Price) pricing provided herein is for reference purposes only. Actual retail prices are established by the applicable dealer and may vary by location. MSRP pricing is subject to change without prior notice. The MSRP may be different for products sold in California. The MSRP in Alaska and Hawaii will be higher. Please check with a local dealer for accurate pricing information.
Your personal selections from our range of products.