Send us your question or comments. We will get back to you as soon as possible.
0344 225 1540
Monday to Friday: 09:00-19:00 Saturday: 09:00-13:00
UserMenu_Hello
At Husqvarna, we’ve worked hard to learn what defines comfort in professional forestry and logging, how it can be improved and what type of comfort is needed in each part of your workday.
Clean and whole clothes are safe clothes. Your protective clothes are regularly exposed to sweat and oil — substances that may reach the protection layer and reduce its function.
Husqvarna protective clothes are available in many different sizes, to fit all types of loggers and challenges. We have created the size guide below to help you. Take a few moments to check your body measurements against the guide to find your right size.
Working with chainsaws (both electric chainsaws and petrol chainsaws) during winter can be challenging. Here are some tips on what you can do to stay safe and productive when it gets cold outside.
A different work technique is used for limbing thick branches than that used for thin branches. This applies to leaf trees and other trees with thick, extensive branches. The working technique often matches the technique used for crosscutting. In order to avoid splitting and the guide bar pinching, it is important that you use the correct technique and sequence.
Crosscutting trees which have compressive stress from the bottom should be done by following this technique.
Consider the crosscutting carefully, especially for larger logs. An incorrect work technique can be dangerous and cause the trunk to split or the guide bar to become pinched. First assess the tension in the trunk. Make it a habit to look at how the trunk reacts to being cut. You may have misjudged the tension.
Follow this working technique when limbing the underside of the tree trunck.
Stand on the left side of the trunk and begin limbing on the right side of the trunk. Work calmly and methodically, branch by branch.
Crosscutting trees which have compressive stress from the top should be done by following this technique.
Watch this video for information on how to use the turn around method to fell a tree.
Follow these basic rules when using a chainsaw for more efficient use and increased personal safety.
If you have estimated the tree incorrectly or failed to follow the felling process, this may result in hang-up with another tree.
The bumper spike acts as a pivot between the engine body and guide bar.
Different directional notch methods than open face notches.
For small trees, it is easiest to saw the felling cut straight from behind.
A catch (a piece of unsawn wood) is saved for one last operation before the tree is felled, hence the name “Safe corner”. A major advantage of this method is that the hinge can be clearly cut and inspected before the tree is felled. The tree cannot fall backwards either due to the corner. The method is also beneficial to use on moderately forward or backward leaning trees.
For safe and efficient tree felling you should follow these simple steps.
Prepare the directional notch by sawing off any root protrusions that might complicate felling. It is often useful to cut the bark on the sides of the trunk at the level of the intended directional and felling cuts so that the cuts are clear.
A bore can be used with most felling methods and can be applied regardless of guide bar length and tree size. It is essential that the bore method is carried out in the correct manner.
Kickback can occur during most work procedures if the chainsaw is not handled carefully. This is why it is essential for you to learn and use correct saw technique. Always use a chainsaw with a working chain brake. Thumbs and fingers must be completely wrapped around the handles. Always keep your left thumb under the front handle when you use the saw to catch the saw in case of kickback.
Safe felling requires great care and precision. The directional notch determines the direction of fall, and you fell the tree with the felling cut. Left between these two cuts is the hinge, which directs the tree down to the ground towards the planned directional target in a safe way.
Find another open face directional notch felling technique.
Before felling a tree follow these simple steps to fell safely.
By not sawing through the full tree diameter when cutting from behind, but saving an edge on the opposite side, the tree is prevented from falling backwards allowing a felling tool to be used in the felling cut.
The escape path is your lifeline. When the tree starts to fall, you need to quickly move to safety.
Avoid working alone! If there are two or more of you, you can help each other if something were to happen. The minimum requirements on the occasions where you are working alone:
A modern chainsaw must be fitted with the following safety features:
TrioBrake™ is a safety system for Husqvarna chainsaws, where the chain brake can be activated in a third way – with your right hand – besides the two customary ways, i.e. with the left wrist and through the inertia function.
You should service your chainsaw regularly to maintain the saw's functions and efficiency. You can do a basic service yourself according to the service points below. The safety features should be checked at each use (points 1–5).
What does a forester take to the woods? What equipment improves your work and keeps you protected? This is Husqvarna’s take on what should go in every forester’s toolkit.
When felling larger trees you need to follow a slightly different felling technique.
Sarah Kandel wanted to work with flowers, but coincidences led her into forestry at the age of seventeen. Today, she works as an Environmental operator at the Nature and wood administration in Luxembourg. We’ve talked to her about chainsaw safety.
When working with chainsaws, limbing is usually the operation that requires the most time and effort. With this in mind; you have a lot to gain by learning a good technique.
When it comes to safety clothing and equipment, different rules and regulations apply in different countries. But no matter where you are, this list of items will enhance your safety when working with chainsaws.
Believe it or not, but “how do I start a chainsaw?” is a common question (or at least a frequent Google search) amongst chainsaw users. In this guide we’ve put together some tips on how to get your saw ready to perform.
A chainsaw needs regular servicing to perform at its best and last for a long time. Here’s a guide to the things you can take care of yourself.
Working with chainsaws can be a dangerous business. But if you follow a few basic recommendations, you’ll be able to get rid of any worries and concentrate fully on the task ahead.
Cutting with a dull chain leads to higher fuel consumption and excessive wear. Luckily, you can easily avoid this by filing your chains regularly and correctly. Everything you need to know about sharpening your chainsaw is right here.
When felling trees, the correct working techniques are essential. Not only to create a safe working environment, but also to be more effective when working.
Always check the chain lubrication, chain brake and inertia functions each time you use your chainsaw.
Your personal selections from our range of products.