Maintenance


How to change to a terrain kit on your Husqvarna Automower® 400-series

When it’s slippery, or if you have slopes on your lawn, our terrain kit helps your Automower® to perform. This easy guide shows you how you can easily switch to a terrain kit. If you have an Automower® 300-series go here for instructions:

No Image Available

Checklist for mounting a terrain kit:

  1. Turn the Automower® upside down
  2. Put a flatbed screwdriver under the wheel cap and bend it outwards to remove it
  3. Use a socket wrench to loosen the nut
  4. Remove the tyre
  5. Place the square nut in the plastic slot
  6. Put the brush holder in place and screw it tight. Note that there is one brush holder for the left side (L) and one for the right side (R).
  7. Place the brush in the second brush holder and attach it with the hex key.
  8. Put the terrain kit wheel in place
  9. Place the washer and nut in place, and tighten it with the socket wrench
  10. Reattach the wheel cap

Related articles

  • Automower X-line Led Lights
    Lawn and Garden

    Treat your Husqvarna Automower® to an all-inclusive winter stay

    Give your robotic lawn mower a good service before putting it to winter rest at one of our Husqvarna dealers. We will store, and take care of your lawn mower, and make sure you get a longer service life out of it.

  • Lawn and Garden

    How to change to a terrain kit on your Husqvarna Automower® 300-series

    When it’s slippery, or you have slopes on your lawn, our terrain kit helps your Automower® to perform. This easy guide shows you how you can easily equip your mower with a terrain kit. If you have an Automower® 400-series go here for instructions:

  • Lawn and Garden

    How to regularly clean your Husqvarna Automower®

    It is important to keep your Automower® clean for the best performance and a long service life. A mower with a lot of clippings attached also handles slopes poorly. It is recommended to clean it using a brush, spraying with water, or use a damp cloth. Never use running water, high-pressure washer, or solvent, when cleaning your Husqvarna Automower®.