Maintenance


Taking care of your cutting equipment

The chainsaw needs regular servicing to perform at its best and last for a long time. Here’s a guide to the things you can take care of yourself.

Correct chain tensioning

Make sure the chain is correctly tensioned. A slack chain may jump off the guide bar, injure you and damage the chainsaw. Overly tight chain tension can cause premature wear of the guide bar. A properly tensioned chain should not hang under the guide bar. The chain tension is correct when the chain is in contact with the underside of the guide bar and you still can pull it around easily by hand.
Always let the chain cool before adjusting the chain tensioning. As it cools off, the chain will shrink.
Tensioning the chain

Chain lubrication

Poor lubrication is a major cause of premature wear. We recommend that you check and refill the chain oil every time you refuel. Husqvarna chain oil has been developed to provide good lubrication for our cutting systems.

  1. Start the chainsaw
  2. Hold the saw over a stump and rev up the engine
  3. Chain lubrication is working if there is a line of oil left on the stump
Lubricating the chain

Bar maintenance

Most guide bars problems are related to incorrect chain tensioning or poor lubrication or faulty working techniques. The area exposed to most wear is the underside of the bars, where most of the cutting is done.

  • Turn the guide bar every time the chain is changed so that it will wear evenly.
  • Clean the guide bar groove and oil inlet regularly.
  • File away burrs from the bar rails.

Cleaning the bar

Replace the bar

Check the bar regularly for wear and burrs on the rails. Replace the bar if:

  1. The bar groove is not deep enough to hold the drive link. Check at the most worn part on the rail.
  2. The chain is not kept straight up in the groove.

Sharp chain and correct depth gauge setting

Keeping your chain well maintained and sharp is key. That’s why we’ve dedicated a full article to sharpening your chain.

Related articles

  • Husqvarna petrol chainsaw bore cut
    Maintenance

    How To Clean Your Husqvarna Chainsaw Air Filter

    It can be confusing to know exactly how to clean your chainsaw air filters. Especially if you’ve never done it before! But as the old saying goes, ‘prevention is better than a cure’.

  • T535i XP with SP21G chain and arborist trousers
    Maintenance

    Chainsaw Chain Guide - Measurements, Sizes, and Types

    There’s nothing worse than a dull chainsaw chain. Professionals swear by sharpening their chain regularly, often, after each use. But like any serviceable part, your chainsaw’s chain will eventually wear out and will require replacement.

  • 440
    Maintenance

    Common Chainsaw Problems Solved

    Chainsaws are among the most efficient power tools around. Few others can move a few hundred tonne of wood with minimal effort. From felling trees to chopping firewood and carving, a high-quality all-round chainsaw is an arborist’s best friend.