Maintenance


How to install your Husqvarna robotic lawn mower

Owning a Husqvarna Automower® is all about ease of use, which is felt instantly as even the installation process has been fine-tuned. Here’s a guide to how easy it is to install a Husqvarna robotic lawn mower.

Automower concept/installation film, EN
Begin by taking a look at your lawn. To minimise the risk of having your machine get stuck or damaged, the grass has to be cleared of all rocks, twigs, tools, toys and similar obstacles. Also, if the grass is longer than ten centimetres you are recommended to cut it with a regular lawn mower one last time.

1. Place the charging station


Place the charging station on flat ground in the middle of the cutting area with some free space around it. Make sure the station is free from sunlight, out of reach of sprinklers and close to a power outlet.

2. Charge the battery


Once the charging station is in place, it’s time to charge your robotic mower. Put the robotic mower in the charging station and move on to the next step. Charging an empty battery takes 80-100 minutes.

3. Lay the boundary wire


The boundary wire is put along the edges of the lawn to define the cutting area. Simply attach it to the ground with the special nails enclosed in the package and the robotic mower will know exactly where to turn. Put “islands” of wire around flowerbeds and bushes to keep the mower from running into them.

4. Lay the guide wire


The purpose of the guide wire is to lead the Husqvarna Automower® back to the charging station when needed. Connect one end to the station and place the wire straight across the farthest part of your garden so that the robotic mower can easily find it. The other end is attached to the boundary wire where they intersect. Both the boundary and the guide wire are then connected to the charging station.

5. Relax


Turn on your Husqvarna Automower®, select your four-digit pin code, adjust the cutting height and set the work hours. And that’s it! The robotic mower will charge until ready before it heads out – at which point you have officially mowed the lawn for the last time.
Unboxing a Husqvarna Automower Place the charging station Lay the boundary wire for a robotic lawnmower

Related articles

  • Maintenance

    How to change to a terrain kit on your Husqvarna Automower® 400-series

    When it’s slippery, or if you have slopes on your lawn, our terrain kit helps your Automower® to perform. This easy guide shows you how you can easily switch to a terrain kit. If you have an Automower® 300-series go here for instructions:

  • Maintenance

    How to change to a terrain kit on your Husqvarna Automower® 300-series

    When it’s slippery, or you have slopes on your lawn, our terrain kit helps your Automower® to perform. This easy guide shows you how you can easily equip your mower with a terrain kit. If you have an Automower® 400-series go here for instructions:

  • Maintenance

    How to regularly clean your Husqvarna Automower®

    It is important to keep your Automower® clean for the best performance and a long service life. A mower with a lot of clippings attached also handles slopes poorly. It is recommended to clean it using a brush, spraying with water, or use a damp cloth. Never use running water, high-pressure washer, or solvent, when cleaning your Husqvarna Automower®.