Husqvarna W 1220 Diagrip™

• Diagrip™, a revolutionary new technology for manufacturing segments, which yields superior cutting capacity, longer life and a smooth, rapid cut. • Available with 3,8 mm blade thickness, for low-powered electric saws. • Three-groove segment design, “four segments in one” to optimise segment cooling and disposal of saw slurry. This provides extremely good cutting speed and blade life. • Available with low noise three-layer sandwich blade core, which halves the perceived noise level.

600-1200 mm / 0-0 "

Benefits & Applications
Technical specifications
Fits to
Documentation
Article no.

Benefits

Diagrip

Diagrip™ is a revolutionary new technology for producing diamond segments. The diamonds have a special treatment that ensures an optimal distribution. Also, the diamonds are held in the segment for longer, so they are utilised maximally. The result is blades with superior cutting capacity, longer life and a smooth, rapid cut.
Sandwich shape segments

Low noise wall saw blades: The core is a spot-welded, three-layer sandwich design with a copper centre. Compared to a standard solid core, the noise level is reduced from approx. 95 to approx. 85 dB. (However this figure may vary due to cutting depth, blade diameter etc. With continuous noise, a 10 dB drop represents a halving of the perceived noise.)
Design of the segment

The design of the segments is based on power being concentrated to a very small contact surface between the segment and the material to be sawn. This results in a tool that starts in a smooth, controlled manner when you first apply the blade, and that is optimally free-cutting for the duration of its service life.
Efficient cooling

The design of the segments promotes the efficient cooling of the segments and steel plates, and helps to dispose of the abrasive saw sludge. This provides extremely good cutting properties and long service life.

Technical specifications for W 1220 Diagrip™

Blade specs
Type	Wet
Power range, min-max	20-40 kW / 26.82-53.64 hp
Blade diameter range, min-max	600-1200 mm / 0-0 "
Center hole diameter	60 mm / 2.36 inch
Power range	High power saws
Suitable for	WS 463/462/440 HF

Segment
Segment height	10 mm / 0.39 "
Segment base	3 mm / 0.12 "
Segment length	46 mm / 1.81 "
Segment width	4.7 mm / 0.19 "

Articles for W 1220 Diagrip™

Article no.	Blade diameter	Segment width
521 88 96-01	600 mm / 23.62 inch	4.7 mm / 0.19 "
521 88 96-02	600 mm / 23.62 inch	4.7 mm / 0.19 "
521 88 96-60		4.7 mm / 0.19 "
521 88 96-61		4.7 mm / 0.19 "
521 88 97-01	650 mm / 25.59 inch	4.7 mm / 0.19 "
521 88 97-02	650 mm / 0 inch	4.7 mm / 0.19 "
521 88 99-01	700 mm / 27.56 inch	4.7 mm / 0.19 "
521 88 99-02	700 mm / 27.56 inch	4.7 mm / 0.19 "
521 88 99-60		4.7 mm / 0.19 "
521 88 99-61		4.7 mm / 0.19 "
521 89 00-01	750 mm / 29.53 inch	4.7 mm / 0.19 "
521 89 00-02	750 mm / 29.53 inch	4.7 mm / 0.19 "
521 89 01-01	800 mm / 31.5 inch	4.7 mm / 0.19 "
521 89 01-04	800 mm / 31.5 inch	4.7 mm / 0.19 "
521 89 01-12		5 mm / 0.2 "
521 89 01-60		4.7 mm / 0.19 "
521 89 01-61		4.7 mm / 0.19 "
521 89 02-01	900 mm / 35.43 inch	4.7 mm / 0.19 "
521 89 02-02	900 mm / 35.43 inch	4.7 mm / 0.19 "
521 89 02-07		5 mm / 0.2 "
521 89 02-60		4.7 mm / 0.19 "
521 89 02-61		4.7 mm / 0.19 "
521 89 03-01	1000 mm / 39.37 inch	4.5 mm / 0.18 "
521 89 03-02	1000 mm / 39.37 inch	4.5 mm / 0.18 "
521 89 03-09		5 mm / 0.2 "
521 89 03-60		4.7 mm / 0.19 "
521 89 03-61		4.7 mm / 0.19 "
521 89 04-01	1200 mm / 0 inch	4.5 mm / 0.18 "
521 89 04-02	1200 mm / 47.24 inch	4.5 mm / 0.18 "
521 89 04-60		4.7 mm / 0.19 "
521 89 04-61		4.7 mm / 0.19 "
521 89 05-01		4.7 mm / 0.19 "
521 89 05-02		4.7 mm / 0.19 "