Compare Handheld power cutting products

DEX

DEX is a dust management system for wet and dry cutting, which contains several solutions. The Vac attachment on the K 3000 Vac and the DC 1400 are two solutions within this system. Most of the power cutters have a water-saving wet cutting kit, which ensures that exactly the right amount of water is used to bind the dust. This results in cleaner cutting with less water usage and slurry, compared to traditional wet cutting. The mobile battery- powered water tank WT 15 is available as an accessory, which means that you don’t have to pump manually...

SmartCarb™

Built-in automatic filter compensation, maintains high power and lowers fuel consumption.

DuraStarter™

DuraStarter™ is a patented, dust-sealed starter attachment, where the return spring and the pulley bearing are sealed. This makes the starter virtually maintenance free, giving a further boost to the reliability of our cutters.

Reversible cutting arm

The cutting arm is reversible which lets you cut closer to walls or the ground. The drive belt has a fully sealed trans-mission. This keeps out cutting dust etc, reducing wear.

Sealed transmission

Reduces the wear and slippage risk.

Anti-vibration system

Our anti-vibration system reduces vibrations in the cutter handles, so they are more comfortable to hold and can be used for longer periods. To enable the user a comfortable operating position and to reduce strain, the distance between the handles is large. The handles and the short engine body mean the user always stands close to the machine, for easier handling and control.

X-Torq®

Engine with X-Torq® produces 75 % less emissions, 20 % lower fuel consumption and more power.

Active Air Filtration™

The new generation of Active Air Filtration™ is one of the most efficient air filtration systems on the market, delivering operational times (for dry cutting) of up to one year, with no filter service required.

EasyStart

Ensures 50% easier starting by reducing the compression in the cylinder during starting.

Wet cutting kit

All our cutters except the K 3000 Electric feature our robust new wet cutting kit, with low water usage.

Active Air Filtration™

The new generation of Active Air Filtration™ is one of the most efficient air filtration systems on the market, delivering operational times (for dry cutting) of up to one year, with no filter service required.

Fuel indicator

Fuel indicator on the tank shows fuel level, to help avoid unnecessary stoppages.

Specially designed starter handle

Specially designed starter handle, with room for heavy gloves.

Adjustable carry strap

Adjustable carry strap allows full freedom of movement.

Chromium-plated blade guard

Chromium-plated blade guard, visible in smoke and water spray, enhances control of the cutter.

Fast, stable mounting

Fast, stable mounting of the attachment onto the rail.

Double attachment mountings

Double attachment mountings allow cutting from both directions.

DEX

DEX is a dust management system for wet and dry cutting, which contains several solutions. The Vac attachment on the K 3000 Vac and the DC 1400 are two solutions within this system. Most of the power cutters have a water-saving wet cutting kit, which ensures that exactly the right amount of water is used to bind the dust. This results in cleaner cutting with less water usage and slurry, compared to traditional wet cutting. The mobile battery- powered water tank WT 15 is available as an accessory, which means that you don’t have to pump manually...

Elgard™

The advanced electronic overload protection – varies the rotation speed to warn of approaching overload.

Pulling rotation

Pulling rotation reduces the risk of sticking and kickback.

Electronic Softstart™

Provides starting with normal, slow acting fuses.

Generously dimensioned mitre gear

Generously dimensioned mitre gear provides high durability, minimal power loss and low noise levels.

Deep cutting indoors

Efficient electric cutter with easy to handle technique for cutting up to 400 mm deep.

Ideal for flush cutting

The K 3000 Cut-n-Break is ideal for flush cutting, since its adjustable bladeguard allows cutting close to walls and floors.

Wet cutting kit

All our cutters except the K 3000 Electric feature our robust new wet cutting kit, with low water usage.

Hydraulic gear motor

Blade brake

Servo for RPM control

Reversible cutting arm

The cutting arm is reversible which lets you cut closer to walls or the ground. The drive belt has a fully sealed trans-mission. This keeps out cutting dust etc, reducing wear.

Replaceable arbor bushing

Peripheral drive

Adjustable front handle

Automatic start for water flow

DEX

DEX is a dust management system for wet and dry cutting, which contains several solutions. The Vac attachment on the K 3000 Vac and the DC 1400 are two solutions within this system. Most of the power cutters have a water-saving wet cutting kit, which ensures that exactly the right amount of water is used to bind the dust. This results in cleaner cutting with less water usage and slurry, compared to traditional wet cutting. The mobile battery- powered water tank WT 15 is available as an accessory, which means that you don’t have to pump manually...

Air motor

Wet cutting kit

All our cutters except the K 3000 Electric feature our robust new wet cutting kit, with low water usage.

Automatic mist lubrication

Reversible cutting arm

The cutting arm is reversible which lets you cut closer to walls or the ground. The drive belt has a fully sealed trans-mission. This keeps out cutting dust etc, reducing wear.

Replaceable arbor bushing