HUSQVARNA 372 XP®

A true professional saw built for very demanding applications, including felling and general logging. The crankcase and crankshaft are extra heavy-duty and the carburetor has vibration dampening in order to handle high speeds and high loads. This saw combines low weight, high power and rapid acceleration with flexible operation.

70.7 cc, 5.3 hp, 15"-28", 13.4 lbs

from

$ 859.95

Manufacturer's Suggested Retail Price*

Features for 372 XP®

  • Centrifugal air cleaning system removes larger dust and debris particles before reaching the air filter. This results in reduced air filter cleanings and improved engine life.

  • System designed to reduce vibration levels to the operator, which lessens fatigue.

  • Easier access to chain tensioning device.

  • Forged three-piece crankshaft for maximum durability for the toughest applications.

  • Sturdily built crankcase withstands high rpms and tough professional use, ensuring a long service life.

  • Allows you to control oil flow depending on application and weather conditions.

  • Better grip and a 7° offset handle reduces fatigue.

  • Facilitates cleaning and replacement of the air filter.

More features

Product reviews for 372 XP®

HUSQVARNA 372 XP® 4.5 5 40 40
great saw for felling and bucking hardwoods I purchased this saw as my largest saw of my line up. I wanted a saw that could run a 24'' or28''bar with ease and this saw does just that. The build of the saw is great very robust. The saw is very well balanced and is a pleasure to use. I hope the few crank bearing failures I've read about have been just flukes or problems due to gas. I bought this saw to make sure I could get a saw without auto tune. I know the 550 562 and 576 are prob selling well but I like simple and for me when something messed up in the woods I like the fact I can throw a new carb on without programing ect. I also will say my dealer #Monroe Tractor in Monroe, NC# was great to work with and Tony H was very helpful. I look forward to dealing with them again. August 13, 2013
not very well built i have two 372xp's less that and year old the first has had the crank bearing and seals already changed while still being less than 3 months old the second one as already blown up running just tru fuel in it and it wasn't warrantied because of fuel issues it also has been in the shop 3 times because of carb and ignition issue when it was brand new that still isnt fixed June 2, 2013
Good Saw This saw has been with me one month and it cuts great and goes all day, i am glad i spent my money however to day the ignition switch stopped working at only a month old which was very dissapointing, now i have to go and get it fixed I don't know why this happened,however it is very annoying. June 1, 2013
Not like the older genration saw I had a 372xp I purchased about 5 years ago and it was an excellent saw until it seized up after moderately heavy use. I purchased another 372xp in December of 2012 and immediately noticed a lack of power compared to the former saw. I brought it to a tech who has sold and serviced Husqvarna and Jonsered for many years to get tuned and did not like what he had to say. The new 372's have a different ignition system and the bearing are sealed in plastic which have a short life expectancy. He said that he has seen many saws come in with blown bearings after light use. I didn't think I would say this, but I may be turning into a Stihl operator in the near future. I am not impressed with Husqvarna's quality. May 9, 2013
Extreme performance! I recently made the switch from running all Stihl saws to Husqvarna and WOW am I happy I did! The balance and power of this 372xp with a 24" bar and full chisel chain is amazing compared to the Stihl saws of the same size, my guys love the performance of the saw especially in hardwood like oak and hard maple and this saw will out-cut the other brand hands down. The saw starts very eaisly when hot or cold, it is very well balanced and power to weight ratio is excelent as well. This saw is a true pleasure to use. I noticed that this saw and the other new Husqvarna saws that I have purchased are so much smoother running with much less viberation than the competition it is unreal! I would highly recommend this saw to any professional Arborist/logger without question. I recently let another one of my Arborist friends use this saw on a White Oak removal and he was blown away at the power, speed and low viberations he is now selling off his Stihl units to get several of these 372xp saws. I have also made the change from MS200T climbing saws over to the Husqvarna 338xpt and my climbers LOVE them!! March 29, 2013
Loose bolts I have owned my 372 for 4 years. Excellent saw! I upgraded from a 365. Only gripe I too have is the Allen screws loosening up. Over all good starting saw and relyable February 24, 2013
Great Saw After 5 years of cutting 8 cord of hardwoods per year with a couple of homeowner type saws, I decided to upgrade to the 372xp, and am I glad I did, it makes cutting firewood more fun than ever, it is light and fast and goes through Hickory with ease. My only regret is that I didn't get one sooner. I run it with a 20" bar and it works great. The only problem I found were the screws vibrating loose, something the dealer should warn the costumer about. November 18, 2012
25 cords a year When I had decided to buy a new chainsaw, I had intended to buy the 357, a friend advised me to step up to the 372. The cost was market compatible, the weight is acceptable, the saw never gives up on me, plenty of power. It has it's moments of hard to start, first time of the season or really wet conditions, but I am happy with the saw, it shows up to work. It does use more fuel and a wrap around bar would be nice. But I do love this saw. October 29, 2012
<<Previous 2 3 4 5 Next>>