Bought this chainsaw as an upgrade from the cheaper ones I've always had over the past 20 years and it was awesome initially. Great power and smooth, however, I used it only 6 hours last year and the first time I used it this year, I started it and let it sit and warm up for about 3 minutes like I usually do and turned around to see it smoking and on fire! Could not believe it! Freaked my son out. Put the fire out and brought it in to dealer as I got the extended 4 year warranty but then was told i was out of luck and they would not warranty it. They say because the chainsaw was warming up with the chain break on it was not warrantied. They say it burned out the clutch and started a fire and that is not covered! Are you kidding me! I get it that if I left it on high idle for a long time but it was on low idle just sitting there for about 3 minutes on a class 5 driveway and it burned up. What a joke. Called Husqvarna directly and they were no help at all just read from a corporate script and basically said too bad. Unbelievable to me that a supposed high quality chainsaw could be that fragile. I had thought Husqvarna made a good product and I just bought a $4000 Husqvarna riding lawnmower last week just a day before this happened but will be returning it today. So disappointed and will not recommend Husqvarna to anyone.
April 28, 2015
Great all around saw. Easy to use and all day reliability.
March 11, 2015
This saw is a beast!
I purchased this saw and had 5 brush piles on my property about 30 yards across each and 15-20 feet high. Also had many trees that had died and needed to come down. I went to work straight away with it and cut some trunks as big as 40 inches across. The saw handled it quite well. Cords and cords of firewood have been made thanks to this saw. The only thing I can find lacking is. During the chain run in, I tightened the chain 3 times and the bar has no more adjustment and the chain provided with the saw sags now more then it should. Aside from that, everything is very good. I will likely have someone remove a link while sharpening the chain and continue using it with another new chain in the mean time.
March 8, 2015
this saw is super fast
has plenty of power and is great on gas was a long bar to saw through big stuff
February 18, 2015
Great saw, Big problem
I have been purchasing and using Husky saws for over 35 years. This is the first saw that has a real safety and mechanical problem. The 450 saw uses only a single nut to hold on the bar and chain. This single nut is not enough to hold on the bar and chain. The bar and chain will come off quickly when cutting. The running chain destroyed the chain, bar and part of the saw. I check my equipment before and after use. Fortunately the chain missed me. I think Husqvarna needs to rethink this design. All of my other Husky saws have two nuts on the bar and have never come loose when tightened.
November 6, 2014
excellent all around performer
I"ve had this saw for five years and hasn't been to the shop yet. I cut about eight to ten cord a year give or take some and this saw has never let me down. I suggest the 18" bar and no bigger. If you need to go larger you better off going to the 455 Rancher,but that is more than I would need .
October 4, 2014
Replaced a STILH chainsaw with this one. The STILH was a bear to start, IF IT STARTED AT ALL! This saw is just the opposite. Starts easily every time! Only problem I have had, and it may be me, is keeping the chain tight and with the bar adjustment. Even so, one of the BEST saws I've ever owned , and at 60+ I've only bought three! I cut @ three cords of wood every summer/fall, and this saw has not let me down in five years!
September 11, 2014
A major step up from my homeowner's chainsaw
Fighting to keep my Craftsman chainsaw running I decided to take a major step up. The Husqvarna 450 was available at an excellent price so I jumped. Now, after over three years of use, often heavy at times, I am really glad I did. Right out the gate it has always been very easy to start if you follow the simple procedure it advised. And once warmed up it will almost always restart the first pull. So I have no qualms about turning it off when repositioning for the next cut(s). But the big thing for me is how relatively light this saw is for its size and power.
As to the power, I have never found it lacking as long as I have a relatively sharp chain. And it is important to keep the bar tip lubricated, especially when doing a long session of heavy cutting. I forgot to lubricate it one time and the tip overheated and froze on me. This saw can run fast and hard for a long periods of time and that puts a lot stress on the bar tip if it is not adequately greased. Keep a bar tip grease gun with your saw as a reminder, especially if you are going to be a heavy user of this tool.
September 6, 2014