HUSQVARNA 445

New powerful all-round saw for people who value professional qualities in a saw. The X-Torq® engine means lower fuel consumption and reduced emission levels. Auto return stop switch and visible fuel level makes the saw easier to handle. Equipped with Smart Start® and fuel pump to ensure easy starts every time.

45.7 cc, 2.8 hp, 13"-20", 10.8 lbs

from

$ 309.95

Manufacturer's Suggested Retail Price*

Features for 445

  • Centrifugal air cleaning system removes larger dust and debris particles before reaching the air filter. This results in reduced air filter cleanings and improved engine life.

  • X-Torq®

    X-Torq®

    Delivers lower fuel consumption and reduced exhaust emission levels in accordance with the world´s most stringent environmental regulations.

    Delivers lower fuel consumption and reduced exhaust emission levels in accordance with the world´s most stringent environmental regulations.

  • Combined start/stop switch and fuel pump make the saw very easy to start.

  • Facilitates cleaning and replacement of the air filter.

  • Distinct marks for better felling precision.

  • Allows for easier starting and reduces the risk of engine flooding.

  • Easier access to chain tensioning device.

  • Saves time when changing spark plugs and cleaning.

More features

Product reviews for 445

HUSQVARNA 445 4.7 5 346 346
Homeowner saw, performs like a pro: Husky 445 I have used the saw four times and could not be happier with it. Starts easily, cuts well and runs like a champ! I use the saw for clearing wind breaks on farms. It is the oerfect balance between light weight and durable. Excellent product! September 27, 2012
Great saw Starts great every time hot or cold. Has plenty of power. September 26, 2012
Plenty of power to rip thru 8 "mesquites, no problem. Cleared some over grown mesquite trees on my property, the saw starts easy and has plenty of power to spare. Mesquite is a very hard wood. No problems so far, I'm a happy camper. September 19, 2012
the little saw that could This saw is lighter than most chainsaws of its size, powerful prenty of torq what a little beast. I picked one of these saws up at Lowe's and i got more than i expected . the one i bought i believe has the same motor as the 450. Its a 2011. i converted the automatic oil pump to an ajustable much better next im going to swap to drum sprocket and i think i can put an aluminum handle on it. I dont care about the warranty as long as u take care of the saw it should last half your life time. I lighty blow out around the motor with the air compressor every time im done cutting and grease the sprocket bearing in the cluch and bar . great saw. this doesnt have anything to to with the saw but the Husqvarna bar oil is low in viscosity to me it doent stick the the chain at hi speeds great for winter but not for summer i also have a 353 e tech love them both. the 353 runs so nice aways starts the first pop on the pull when warm. oh one more thing i would recomend using the decompression valve on the the xtorg saws my 445 kicked back when sarting it real hard one day and caught the sarter pulley and broke it. rare to happen. just bad luck. happened on friday the 13th user error. one other slight problem is the casing around the chain and sprcoket isnt open enough for chips to get out and they go back around and jam the bar sometimes guess thats what u get for sharping with a 7/32 file on a new chain haha flat chissel chain. recommend chipper chain in hard wood bore cuts much smoother i gap my plugs a little more than the recomended better engine response better starting from my experince i clean them once a month on a wire wheel and replace it once a year works for me. Ive done some brush clearing and some felling with it. i bought it in July this year. can someone tell me if felling dogs from a 357 will fit my 353 or a good set a reason why i shouldnt run a 3/8 chain on either of these two saws was thinking a 22inch bar and good set of felling dogs for my 353 to balance it out at the bar end i found an oregon 3/8 standard drum that fits September 18, 2012
great saw One of the best saws I have ever used.Had Sthil in past.Cranks everytime withtn 2 pulls.More than enough power.Cut 3 to 4 cords of firewood a year. August 30, 2012
Husky chainsaw 445 Worst piece of equipment I have ever owned. Engine floods everytime I try to start it. Totally useless and ready for the scrap yard. Yes I watched the movie and read the manual. I suspect the problem is in the carb. August 29, 2012
This product is reliable Bought this saw when I had three trees die this year. This is my forth chainsaw I have purchased and is by far the easiest to use. Cranks very easy and is light enough in weight to allow you to keep working. August 13, 2012
professional opinion this saw is the best lite weight saw I have ever used I use this saw for professional tree service use on very large trees and on the Alaskan Saw Mill to bard out some of the logs to make tables and book cases the saw cuts like a dream and handles great I have dropped many trees 35-40 inches in diameter and it does not take long with the 20 inch bar I would recommend this saw for any job big or small it is the best saw made. August 2, 2012
<<Previous 5 6 7 8 9 ... 44 Next>>