HUSQVARNA 372 XP®
The perfect saw!!
I got this saw today because I needed something with more power and the ability to support a larger bar. Coming from a 460 Rancher that pulls a 24' bar just fine this one rips through these oak trees like they are butter. I currently run a 28' bar which is plenty for my property. But, I have heard that this saw does flood easy. No problems yet.
February 26, 2014
I traded in a Lowe's version of a Husqvarna 455 for this 372XP. What a difference! You can dig the dogs in when cutting hardwood and it flies right through. The 455 would pretty much just cut using the weight of the saw.
I heat with wood so don't run it for a living but I'm hoping this is the last saw I buy for a long time. It starts easily, runs strong and doesn't weight a ton. I'd buy another one in a heartbeat!
December 21, 2013
Bought this saw with a big air filter and a 28 inch and 22 inch bar. Both with full chisel chains. Incredibly light and maneuverable with the 22 inch bar, a little front heavy with the 28 inch. Handles both bars very well when they are buried in a hardwood tree. Air filter stays incredibly clean even after 2 hours of work on a 60+ inch rotten fir snag tree, that left the whole saw a pretty brown color along with everything in a 30 meter radius of the trunk.
When warm starting with the decompression valve occasionally the pull cord does not fully return to the neutral position after a failed starting attempt. Refraining from using the valve seems to correct that issue.
Saw starts very easily unless you spam pull and flood it. Have to pull it like you mean it.
Bolts and allens had to be re-torqued after first few uses but are now seating properly.
Sucks fuel like a piggy. But after being broke in is similarly efficient to a 455 given the difference in tank size.
Price is comparable to both 2172s and Ms 441s and I prefer the performance and balance of this saw over both of the aforementioned.
Would recommend to any one who needs a saw that is a leg up from the firewood crowd.
November 17, 2013
I bought my saw a little over a year ago for a long lasting firewood saw. I cut about 15 cord a year, and a lot of it is just too big for my old 350 to handle. I run with a 20" Full Chisel, and a 24" full chisel and have been nothing but impressed at the power and dependability of the saw! Make sure to run only non ethanol premium, and good oil, and I am confident this saw will last a life time for someone like me.
November 11, 2013
Bad out of the box
I bought a brand new 372xp and it had a bad crank bearing straight out of the box.Kind of left me wondering about the husqvarna quality assurance program.I returned it to my vendor and after about a week husqvarna agreed to replace it with a brand new saw.The new saw is a beast.The only negative is it floods easy.My 07 372 is still strong and i hope i have as much luck with the new saw.
October 6, 2013
great saw for felling and bucking hardwoods
I purchased this saw as my largest saw of my line up. I wanted a saw that could run a 24'' or28''bar with ease and this saw does just that. The build of the saw is great very robust. The saw is very well balanced and is a pleasure to use. I hope the few crank bearing failures I've read about have been just flukes or problems due to gas. I bought this saw to make sure I could get a saw without auto tune. I know the 550 562 and 576 are prob selling well but I like simple and for me when something messed up in the woods I like the fact I can throw a new carb on without programing ect. I also will say my dealer #Monroe Tractor in Monroe, NC# was great to work with and Tony H was very helpful. I look forward to dealing with them again.
August 13, 2013
not very well built
i have two 372xp's less that and year old the first has had the crank bearing and seals already changed while still being less than 3 months old the second one as already blown up running just tru fuel in it and it wasn't warrantied because of fuel issues it also has been in the shop 3 times because of carb and ignition issue when it was brand new that still isnt fixed
June 2, 2013
This saw has been with me one month and it cuts great and goes all day, i am glad i spent my money however to day the ignition switch stopped working at only a month old which was very dissapointing, now i have to go and get it fixed I don't know why this happened,however it is very annoying.
June 1, 2013