The Husqvarna WS 440 HF electric wall saw sets a new standard, giving the operator increased possibilities for fast and efficient cutting. The adjustable speed with retained power allows the operator to find the ideal speed for each blade dimension, blade type and cutting material. This means that the diamonds cut with very high efficiency. This, combined with the capability to cut in both directions on each side of the track, as well as the possibility to choose rotation direction and control the water spray, makes the Husqvarna WS 440 HF unique. Moreover, it is user-friendly, ergonomic and easy to transport. The WS 440 HF is based on the same saw system as our hydraulic wall saws the WS 462 and WS 463, with modular design, quick connection and radial connection.
The saw has a radial connection on the blade that makes changing the blade extremely easy, particulary when flush cutting.
The smart and flexible universal mounting is a fairly revolutionary accessory that saves energy and time. Because the mounting pivots when positioned on the wall, it is simple to reposition the track during cutting. The mounting also allows you to easily carry out bevel cutting and stair cutting at a variety of angles.
The universal mounting enables stair cutting.
With the universal mounting, bevell cutting is possible.
Your wall saw can be combined with the CS 10, transforming it into a perfect wire saw.
Built on a modular system, the saws are easy to carry thanks to the optimized weight of each module. The weight is also evenly distributed between rail and saw head, because the carriage stays on the track.
The possibility to choose the blade’s direction of rotation and thereby get water spray in the desired direction makes our electric wall saws unique. Also, the operator can adjust the speed with retained power to find the ideal speed for each blade dimension, blade type and cutting material.
Our electric wall saws has an unbeatable power to weight ratio. The powerful, water-cooled electric motors produces an impressive power to the spindle, even though the saws are relatively light.
The remote control provides extensive information to the operator, such as power level, current pressure, operating time, service periods etc, which gives excellent freedom of movement and total control of the sawing process.
The powerful, water-cooled electric motor produces an impressive 25 hp to the spindle, even though the saw weighs just 62 lbs.
Husqvarna eletric wallsaws are compact, user-friendly and ergonomic saws that are easy to transport.
The quick connection makes it easy to attach the saw unit to the carriage. First, you press the saw unit into place on the carriage, and then you attach the unit using the locking device.
Cutting door openings. The undercut is made by flush cutting.
Cutting openings for windows.
Cutting openings for ventilation. To make cuts adjacent to walls, use flush cutting.
Cutting of steps or other uneven contours.
Unique universal mounting that makes it possible to cut at a steplessly adjustable angle.
Flush cutting flange and blade guard to make cut adjustments to walls, ceilings and floors.
The CS 10 is a very useful and efficient saw system, thanks ...
Blade guard holder
Saw carriage
Track in 3 different lengths.
Track holder for easier track mounting.
Mounting bracket, universal
Mounting bracket, standard.
Coupling link for joining tracks together.
Measure pin to mounting bracket.
Tool kit, complete set of wrenches, allen keys and sockets.
Cleaning brush.
Oil, 3dl.
Blade guard.
Fit the standard mounting brackets as set out below:Mark off the cutting line and mark off the expander bolts holes 6.5" from the cutting line.Drill 15 mm holes for the M12 expander bolts.Hang the mounting brackets loosely from the expander bolts, using M6S 12 x 70 or similar.
Place the rail in the mounting brackets and tighten the compression washers.Check that the rail sits correctly in the slots in the mounting brackets.Adjust the distance between the cutting line and the mounting brackets. The distance between the edge and the inner face of the saw cut should be 3.5". Tighten the expander bolts.
Enclose the area to be cut so that unauthorized persons can not be injured or disturb the operator. Check that the blade guard is not damaged or broken. A broken or damaged blade guard must never be used. If cutting is to begin in another position than where the saw unit is located, run the saw unit to the start position.WARNING! A higher speed than the recommended speed can result in personal injury and damage to the equipment.
When the pilot cut is finished, a deeper cut can be made. The depth of these is determined from instance to instance and depends on factors such as hardness of the concrete, existence of reinforcing bar, etc. As the rail is symmetrical, the saw unit can be turned to make a new cut on the other side of the rail. The c-c measurement will then be 13". In this way a cut piece is obtained that is in an easily handled size, making it easier to remove from the workplace. Note For more information about symmetrical rail and blade rotation, see Tips section
Find your local Husqvarna dealer using the dealer locator.