WS 440 HF electric wall saw gives you increased possibilities for fast and efficient cutting in reinforced concrete, brick and other building materials, up to 530 mm thickness. Use this wall saw for all kinds of openings and sawing including stair, bevel and flush cutting. The user-friendly ergonomic design and ease of transport makes your job fast and efficient. WS 440 HF can be combined with CS 10, transforming it into a perfect wire saw.
Ability to assemble and disassemble the flange from either side making changing the blades extremely easy, particularly when flush cutting.
The smart and flexible universal mounting is a fairly revolutionary accessory that saves energy and time. Because the mounting pivots when positioned on the wall, it is simple to reposition the track during cutting. The mounting also allows you to easily carry out bevel cutting and stair cutting at a variety of angles.
The universal mounting enables stair cutting.
With the universal mounting, bevell cutting is possible.
Your wall saw can be combined with the CS 10, transforming it into a perfect wire saw.
Built on a modular system, the saws are easy to carry thanks to the optimized weight of each module. The weight is also evenly distributed between rail and saw head, because the carriage stays on the track.
With the wireless remote control it's easy to change the blade rotation to get the water spray in the desired direction.
The strong motor produces high power to the spindle, even though the saw is light.
For increased efficiency the remote control has a logical and ergonomic design with a large and clear display, which shows the current performance of the saw.
The powerful, water-cooled electric motor produces an impressive 25 hp to the spindle, even though the saw weighs just 62 lbs.
Husqvarna eletric wallsaws are compact, user-friendly and ergonomic saws that are easy to transport.
The quick connection makes it easy to attach the saw unit to the carriage.
Cutting door openings. The undercut is made by flush cutting.
Cutting openings for windows.
Cutting openings for ventilation. To make cuts adjacent to walls, use flush cutting.
Cutting of steps or other uneven contours.
Unique universal mounting that makes it possible to cut at a steplessly adjustable angle.
Flush cutting flange and blade guard to make cut adjustments to walls, ceilings and floors.
CS 10 is a very useful and efficient saw system, thanks to a...
Blade guard holder
Track in 3 different lengths.
Track holder for easier track mounting.
Mounting bracket, universal
Mounting bracket, standard.
Coupling link for joining tracks together.
Measure pin to mounting bracket.
Tool kit, complete set of wrenches, allen keys and sockets.
Fit the standard mounting brackets as set out below:Mark off the cutting line and mark off the expander bolts holes 6.5" from the cutting line.Drill 15 mm holes for the M12 expander bolts.Hang the mounting brackets loosely from the expander bolts, using M6S 12 x 70 or similar.
Place the rail in the mounting brackets and tighten the compression washers.Check that the rail sits correctly in the slots in the mounting brackets.Adjust the distance between the cutting line and the mounting brackets. The distance between the edge and the inner face of the saw cut should be 3.5". Tighten the expander bolts.
Enclose the area to be cut so that unauthorized persons can not be injured or disturb the operator. Check that the blade guard is not damaged or broken. A broken or damaged blade guard must never be used. If cutting is to begin in another position than where the saw unit is located, run the saw unit to the start position.WARNING! A higher speed than the recommended speed can result in personal injury and damage to the equipment.
When the pilot cut is finished, a deeper cut can be made. The depth of these is determined from instance to instance and depends on factors such as hardness of the concrete, existence of reinforcing bar, etc. As the rail is symmetrical, the saw unit can be turned to make a new cut on the other side of the rail. The c-c measurement will then be 13". In this way a cut piece is obtained that is in an easily handled size, making it easier to remove from the workplace. Note For more information about symmetrical rail and blade rotation, see Tips section
Copyright © 2008-2011 Husqvarna AB (publ). All rights reserved. All prices shown are recommended retail prices.
Find your local Husqvarna dealer using the dealer locator.