PP 440 HF electric power pack is specifically developed for the electric wall saw WS 440 HF. The frequency converter is easy to transport to and around the worksite, due to its compact design, low weight and comfortable carry handle. The wireless remote control allows excellent control of the sawing process and gives you the freedom to move around the worksite.
For increased efficiency the remote control has a logical and ergonomic design with a large and clear display, which shows the current performance of the saw.
Automatic water valve minimizes the soiling of water and slurry.
Only one cable and one hose from power pack to machine.
Low weight and compact design.
For connection of peripheral equipment (when using 5-pin, 3-phase system).
Can be operated with 16, 25 and 32 A fuses, with high power on the spindle.
Cable for power connection to saw.
Socket 32 A.
Water hose, 8 m.
Under no circumstances may the machine be started without having read the operators manual and paid special intensions to the safety instructions found in the operators manual. Should the user fail to comply with these, Husqvarna Construction Products Sweden AB or its representatives are free from all liability both directly and indirectly. Read through these operating instructions and make sure that you understand the contents before starting to use the machine. Should you, after reading these safety instructions, still feel uncertain about the safety risks involved you must not use the machine. Please contact your dealer for more information.
Make sure the main power switch is set to “0”-modeConnect incoming power (380-480V, 32 A European connector)Connect incoming water to the water inlet on power pack.
Connect power cable and water hose from the power pack to the saw unit.
Connect the remote control using the supplied Canbus cable. Tighten the cable connector screws by hand.Check that the emergency stop switches on the unit and the remote control have not been actuated by turning them in the direction of the arrow.
Set the main power switch to “1”-mode.The power pack is activated when the indicator lamp is on.The display now shows “SELECT FUSE”. If the available fuse is 32 A, confirm this by pressing the membrane key marked “OK”.The display now shows "Husqvarna PP 440HF PRESS START"
Make sure connections and cables are clean and ok. Clean with wipes or brush. Do not use high pressure water for cleaning the power pack.
Check regularly:Any abnormal noises.Make sure connections and cables are clean and ok. Clean with wipes or brush.Do not use high pressure water for cleaning the power pack. Note For more information about maintenance, please check the operator’s manual.
Copyright © 2008-2011 Husqvarna AB (publ). All rights reserved. All prices shown are recommended retail prices.
Find your local Husqvarna dealer using the dealer locator.