Compare Drilling products

Product	DM 220	DM 280	DM 230
	Remove	Remove	Remove
Included feature Optional feature Feature N/A
Features
Guidance for exact drilling Guidance for exact drilling A LED indicator on the DM 220 shows when the machine is in preferred vertical, horizontal or angled position. This provides more efficient drilling.
Wet and dry drilling Wet and dry drilling The DM 220 features a three-way valve that enables both dry and wet drilling. This makes the batterydriven WT 10 waterpump or the DC 1400 vacuumcleaner perfect complementary products.
Smart Start® Smart Start® By pressing the SmartStart button speed is reduced by half, making it easier to start drilling.
Overload protection Overload protection The Elgard™ feature avalible on several of our drillmotors facilitates that if the motor runs at too high a load for a long period, it will start to pulsate. If the load is not reduced the motor will shut off, to prevent overheating. Elgard™ significantly increases the machine’s service life.
Softstart™ Softstart™ An electronic current limiter for softer starts. Full speed is reached about two seconds after the switch is turned on.
High compability High compability This drillmotor can be used on all of Husqvarna’s larger drill stands.
Load indicator Load indicator The LED indicator shows the load of the machine, allowing the operator to always drill at maximum pressure, for best performance.
Watercooled 3 speed gearbox Watercooled 3 speed gearbox Watercooled 3 speed gearbox for optimal drilling performance and longer service intervals.
Engine
1-phase rated voltage	230/115 V	-	-
Power	1850 W	2700 W	1850 W
Phases	1	1	-
Speeds	3	3	3
Spindle speed full load	580/1400/2900 rpm	-	-
Voltage	-	230 / 110 V	230 / 110 V
Spindle speed full load low speed	-	240/540/930rpm	-
Spindle speed full load high speed	-	350/780/1340rpm	-
Rated output, W	-	1750/1850 W	1100/0 W
Rated current, A	-	13/25 A	8/15 A
Spindle speed idle high speed	-	440/970/1670 rpm	900/2150/4500 rpm
Spindle speed idle low speed	-	300/660/1140 rpm	-
Amperage	-	-	8 / 15 A
Output RPM at full load	-	-	500 / 1400 / 2900 rpm
Drill bit
Max drill bit diameter, handheld	3 inch	-	3 inch
Max drill bit diameter, stand	6 inch	14 inch	6 inch
Dimensions
Weight	12 lbs	29 lbs	15.4 lbs

Compare Drilling products

Product

DM 220

DM 280

DM 230

Guidance for exact drilling

Wet and dry drilling

Smart Start®

Overload protection

Softstart™

High compability

Load indicator

Watercooled 3 speed gearbox

Find a dealer

Intelligent solutions for higher productivity.

Products that really meet customer needs.