Drilling ventilation channels and holes for pipes and cables.
Drilling for installation of stair rails, fences, etc.
Ideal for all core drilling from Ø 100 mm to Ø 600 mm.
Highly effective in reinforced concrete, brick and other building materials.
For heavy-duty applications like water evacuation, ventilation and plumbing channels, waste evacuation pipes, gas supply pipes and barriers.
Drilling holes in stepless adjustable angles.
Drilling multiple holes next to each other to make openings.
Drilling for water evacuation.
Drilling upwards and downwards.
For best ergonomic position
Shows when the machine is in a vertical, horizontal or preferred angled position. This provides efficient drilling.
The machine uses pulsation to warn you of an approaching overload. This increases productivity and extends product life.
Used with starting a hole, speed is reduced by half using the Smart Start® button, which reduces vibration.
An electronic current limiter for soft starts with normal fuses. This gives you a smooth start with high productivity and reduces initial load on motor.
18-step adjustable rpm range ensures optimal speed for all drill bit dimensions.
The LED indicator shows the load of the machine, allowing the operator to always drill at maximum pressure, for best performance.
Speed is reduced to increase torque through rebar and hard aggregates for increased productivity.
Husqvarna WT 15 comes equipped with a Lithium-Ion battery, charger and a Gardena spray nozzle, conveniently placed in a compartment on the WT 15. A fully charged battery will give a continous running time of 45 minutes.
The advanced water tank has an autostop function that safely stops the machine when the water runs out. Also, an indicator shows the battery level.
When transporting the WT 15 the water hose is conveniently wound around the replaceable bottom and the coupler at the end placed in the designated slot.
There is a higher capacity function of the pump built into the electronics. By pushing the switch 1.5-2 seconds the pump will work with double speed giving twice the amount of water. This function is particularly useful together with the Gardena spray nozzle to clean off the machine after work. This function can of course also be used if a cutting job requires extra water for some reason.
Copyright © 2008-2011 Husqvarna AB (publ). All rights reserved. All prices shown are recommended retail prices.
Find your local Husqvarna dealer using the dealer locator.