Compare Drilling products

Product	DM 220	DM 230	DM 280	DM 340
	Remove	Remove	Remove	Remove
Included feature Optional feature Feature N/A
Features
Guidance for exact drilling Guidance for exact drilling A LED indicator on the DM 220 shows when the machine is in preferred vertical, horizontal or angled position. This provides more efficient drilling.
Wet and dry drilling Wet and dry drilling The DM 220 features a three-way valve that enables both dry and wet drilling. This makes the batterydriven WT 10 waterpump or the DC 1400 vacuumcleaner perfect complementary products.
Smart Start® Smart Start® By pressing the SmartStart button speed is reduced by half, making it easier to start drilling.
Overload protection Overload protection The Elgard™ feature avalible on several of our drillmotors facilitates that if the motor runs at too high a load for a long period, it will start to pulsate. If the load is not reduced the motor will shut off, to prevent overheating. Elgard™ significantly increases the machine’s service life.
Softstart™ Softstart™ An electronic current limiter for softer starts. Full speed is reached about two seconds after the switch is turned on.
High compability High compability This drillmotor can be used on all of Husqvarna’s larger drill stands.
Load indicator Load indicator The LED indicator shows the load of the machine, allowing the operator to always drill at maximum pressure, for best performance.
Watercooled 3 speed gearbox Watercooled 3 speed gearbox Watercooled 3 speed gearbox for optimal drilling performance and longer service intervals.
Engine
1-phase rated voltage	230/115 V	-	-	-
Power	1850 W	1850 W	2700 W	3300 W
Phases	1	-	1	-
Speeds	3	3	3	3
Spindle speed full load	580/1400/2900 rpm	-	-	-
Voltage	-	230 / 110 V	230 / 110 V	230 / 110 V
Amperage	-	8 / 15 A	-	-
Output RPM at full load	-	500 / 1400 / 2900 rpm	-	-
Rated output, W	-	1100/0 W	1750/1850 W	1750/1850 W
Rated current, A	-	8/15 A	13/25 A	13/25 A
Spindle speed idle high speed	-	900/2150/4500 rpm	440/970/1670 rpm	-
Spindle speed full load low speed	-	-	240/540/930rpm	240/540/930rpm
Spindle speed full load high speed	-	-	350/780/1340rpm	-
Spindle speed idle low speed	-	-	300/660/1140 rpm	300/660/1140 rpm
Motor	-	-	-	1 phase, electric
Drill bit
Max drill bit diameter, handheld	3 inch	3 inch	-	-
Max drill bit diameter, stand	6 inch	6 inch	14 inch	-
Max drill bit diameter	-	-	-	16 inch
Dimensions
Weight	12 lbs	15.4 lbs	29 lbs	31 lbs

Product	DM 506 H	DM 406 H
	Remove	Remove
Included feature Optional feature Feature N/A
Engine
Motor	-	Hydraulic
Max output	-	9.3 kW / 12.5 hp
Hydraulic flow	-	45.5 l/min
Hydraulic pressure	-	140 bar
Output RPM	-	120 / 230 / 340 / 580 / 980 / 1400 rpm
Speeds	-	6
Water coupling	-	R 1/2
Output on spindle, kW	-	6 kW
Drill bit
Max drill bit diameter, stand	-	25.6 inch
Min drill bit diameter	-	1.97 "
Dimension
Weight	-	35 lbs

Product	AD 10
	Remove
Included feature Optional feature Feature N/A
Techdata
Weight	8 lbs
Speed	0-10.5 fpm

Product	DS 800	DS 450	DS 250	DS 150	DS 50 Gyro
	Remove	Remove	Remove	Remove	Remove
Included feature Optional feature Feature N/A
Cutting equipment
Max drill bit diameter	14 inch	17.72 inch	9.84 inch	6 inch	14 inch
Travel length	25.5/0 inch	25/0 inch	26.97/0 inch	-	26/0 inch
Travel length	-	-	-	19 inch	-
Column
Column size	diameter: 2.875 "; height: 42 "	-	-	-	-
Tilting	-	-	-	-	Continuous
Angling	-	-	-	-	+/-90º
Length, telescopic stanchion	-	-	-	-	125 inch
Other specs
Carriage type	Roller carriage	-	-	-	-
Suitable for	-	DM 280, DM 340	DM 280, DM 230	DM 230	DM 280
Dimensions
Weight (excl. cutting equipment)	-	-	-	-	141 lbs
Packaging size, LxWxH	-	-	-	-	78x36x24 inch
Weight incl. packaging	-	-	-	-	155 lbs
Weight incl. carriage	-	-	-	-	125.6 lbs

Product	DMS 280	DMS 240	DMS 180
	Remove	Remove	Remove
Included feature Optional feature Feature N/A
Features
Load indicator Load indicator The LED indicator shows the load of the machine, allowing the operator to always drill at maximum pressure, for best performance.
Watercooled 3 speed gearbox Watercooled 3 speed gearbox Watercooled 3 speed gearbox for optimal drilling performance and longer service intervals.
Engine
Input power	2300 W	2400 W	-
Voltage	115 V	-	-
Rated output, W	1500/0 W	1500/0 W	0/1725 W
Voltage	-	230 / 110 V	230 / 110 V
Phases	-	1	1
Amperage	-	9 / 20 A	-
Spindle speed full load 2 values	-	185/455 rpm	-
Rated current, A	-	9/20 A	0/15 A
Drill bit
Max drill bit diameter	16 inch	10 inch	6 inch
Travel length	25.5/0 inch	27/0 inch	19/0 inch
Drill connection	1" 1/4	1" 1/4	1" 1/4
Column
Column size	diameter: 0 "; height: 42 "	-	-
Column height	1067 mm	1000 mm	-
Dimensions
Total weight	39 kg	23.3 kg	23.3 kg

Product	PP 325 E	PP 418
	Remove	Remove
Included feature Optional feature Feature N/A
Features
Automatic Power-on-demand Automatic Power-on-demand Automatic Power-on-demand saves fuel and has a five second delay for smoother tool operation during intermittent cutting conditions.
Engine
Power output	13 hp	-
Voltage	400 V	-
Rated current, A	16 A	-
Max output (As rated by the engine manufacturer)	-	13.5 kW / 18.1 hp
Hydraulics
Hydraulic flow, max	10 gal/min	-
Hydraulic pressure	min: 0 psi; max: 9.65 psi	-
Hydraulic flow	-	5, 8, 10 gpm
Hydraulic pressure	-	140 bar
Equipment
Suitable for	WS 325, DM 406, K 3600, K 2500	-
Dimensions
Weight incl. oil and hoses	205 lbs	298 lbs

Product	DC 1400
	Remove
Included feature Optional feature Feature N/A
Engine
Power output	1.88 hp
Rated current, A	16 A
Voltage	220 / 240 V
Phases	1
Specs
Air Flow	129.49 cfm
Max. vacuum	3335.87 psi
Suction inlet diameter	40 mm
Dimensions
Product size, LxWxH	23x115x34.5 inch
Weight	37.5 lbs

Product	WT 15
	Remove
Included feature Optional feature Feature N/A
Features
Powerful lithium-ion battery and charger Powerful lithium-ion battery and charger Husqvarna WT 15 comes equipped with a Lithium-Ion battery, charger and a Gardena spray nozzle, conveniently placed in a compartment on the WT 15. A fully charged battery will give a continous running time of 45 minutes.
Autostop function Autostop function The advanced water tank has an autostop function that safely stops the machine when the water runs out. Also, an indicator shows the battery level.
Convenient transport Convenient transport When transporting the WT 15 the water hose is conveniently wound around the replaceable bottom and the coupler at the end placed in the designated slot.
Two-speed pump Two-speed pump There is a higher capacity function of the pump built into the electronics. By pushing the switch 1.5-2 seconds the pump will work with double speed giving twice the amount of water. This function is particularly useful together with the Gardena spray nozzle to clean off the machine after work. This function can of course also be used if a cutting job requires extra water for some reason.
Techdata
Voltage	230 / 120 V
Water tank capacity	4 gal.
Weight, complete without water	8.6 lbs
Dimensions uncrated (LxWxH)	16.5x6.5x18.1 inch
Battery type	Lithium-Ion, 18V/1,6Ah
Battery capacity	2h at position I
Water pressure, position I	8.7 psi
Water pressure, position II	16 psi
Charger	18V/600mA
External power source	12-24V, min 2500mA
Hose, type and length	3/8” / 10mm, 3 m. / 10 ft.