HUSQVARNA Rider 16C AWD

This Rider has the same advanced articulated steering as the other models, but is also equipped with continuously variable hydrostatic transmission including All-Wheel-Drive. AWD remarkably increase and secure the trafficability on uneven areas and slippery grounds. Front-mounted 94 cm wide Combi cutting deck with the cutting methods BioClip® and rear discharge in one and the same unit. Low emission OHV-engine from Briggs & Stratton.

Briggs & Stratton, I/C, 9.8 kW, Hydrostatic AWD

The power rating of the engines indicated is the average net power output during a normal working situations and fulfilling applicable noise regulations (at specified rpm) of a typical production engine for the engine model measured to SAE standard J 1349/ISO 1585. Mass production engines may differ from this value. Actual power output for the engine installed in the final machine will depend on the operating speed, environmental conditions and other variables. (Europe only)

Features for Rider 16C AWD

  • Briggs & Stratton I/C-engine
  • Control panel
  • AWD transmission
  • Easy access
  • Four large wheels
  • Combi cutting deck with BioClip® (mulching)
  • Combi cutting deck with rear discharge
  • Unique articulated steering

    Unique articulated steering

    The unique articulated steering system allows the rear pair of wheels to swing in underneath the machine. The result is superior manoeuvrability with a minimum turning radius at full lock.

  • Front-mounted cutting deck

    Front-mounted cutting deck

    Front-mounted cutting deck for excellent accessability into corners and under bushes, park benches etc.

  • All-Wheel-Drive (AWD)

    All-Wheel-Drive (AWD)

    All-Wheel-Drive (AWD) ensures traction on uneven, wet and slippery areas and slopes. AWD automatically adjusts the traction on all wheels depending on situation and ground condition.

  • Service position

    Service position

    Service position on the cutting deck facilitates cleaning and service.

  • Robust chassis

    Robust chassis

    Most Riders are built using precision welding in 3-mm thick steel plate and are powder-coated for optimum restistance.