Husqvarna DS 50 Gyro

The Husqvarna DS 50 Gyro is a telescopic stand system that works with most drill motors. This system facilitates quick mounting, easy drilling and fast demounting on the site, which results in good ergonomics but also saves both time and money. The modular system and the stand’s flexibility allow both straight and angled drilling in walls, floors and ceilings. Two base plates are included, the GB 50 T with a mounting for a pivoting drill column and transport wheels, and the GB 50 AT which also has a mounting for an expander bolt.

Husqvarna DS 50 Gyro

Benefits

  • Fast and easy setup between horizontal and vertical drilling operations.
  • Due to the tiltable and turnable column this is the most efficient stand for drilling numerous holes in various positions with a single setup.
  • Because the unit is installed between the floor and ceiling, with no anchoring, you avoid damage to the surroundings.
  • The flexible column means excellent ergonomics, since there are few lifting steps.
  • Flexibility

    Flexibility

    The Husqvarna Gyro is a modular, flexible system with several combination options, where the drill column can be turned 360°, for drilling at almost any angle.

  • Newly developed carriage

    Newly developed carriage

    The drill stands have a newly developed carriage with single and double gearing and a quick connection for easy mounting of drill motors.

  • The rig is secured with the stanchion

    The rig is secured with the stanchion

    When drilling in floors the rig is secured by putting the stanchion against the ceiling. The drilling column is secured to the base plate using the stanchion screw.

  • Gyro unit

    Gyro unit

    The drill column can be turned 360° thanks to the gyro unit.

Applications

  • Angle drilling
  • Horizontal drilling
  • Vertical drilling